TCA9617BDGKR集成电路（IC）的转换器电平移位器规格书PDF中文资料

TCA9617BDGKR属于集成电路（IC）的转换器电平移位器。由德州仪器制造生产的TCA9617BDGKR转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。

1 Features

• Two-channel bidirectional I2C buffer

• Support for standard mode, fast mode (400kHz),

and fast mode+ (1MHz) I2C operation

• Operating supply voltage range of 0.8V to 5.5V on

A-side

• Operating supply voltage range of 2.2V to 5.5V on

B-side

• Voltage-level translation from 0.8V to 5.5V and

2.2V to 5.5V

• Footprint and function replacement for TCA9517

• Active-high repeater-enable input

• Open-drain I2C I/O

• 5.5V Tolerant I2C and enable input support

• Lockup-free operation

• Powered-off high-impedance I2C bus pins

• Support for clock stretching and multiple controller

arbitration across the device

• Latch-up performance exceeds 100mA per JESD

78, class II

• ESD protection exceeds JESD 22

– 4000V Human-body model

– 1500V Charged-device model

2 Applications

• Servers

• Routers (Telecom Switching Equipment)

• Industrial Equipment

• Products with many I2C targets and/or long PCB

traces

3 Description

The TCA9617B is a BiCMOS dual bidirectional buffer

intended for I2C bus and SMBus systems. The

device provides bidirectional voltage-level translation

(up-translation and down-translation) between low

voltages (down to 0.8V) and higher voltages

(2.2V to 5.5V) in mixed-mode applications. This

device enables I2C and similar bus systems to be

extended, without degradation of performance even

during level shifting.

The TCA9617B buffers both the serial data (SDA) and

the serial clock (SCL) signals on the I2C bus, allowing

two buses of 550pF to be connected in an I2C

application. This device can also be used to separate

two halves of a bus for voltage and capacitance.