TCA9546APWR.B中文资料德州仪器数据手册PDF规格书

1 Features

1. 1-of-4 Bidirectional translating switches

. I2C Bus and SMBus compatible

. Active-low reset input

. Three address pins, allowing up to eight

TCA9546A devices on the I2C bus

. Channel selection via I2C Bus, in any combination

. Power-up with all switch channels deselected

. Low RON switches

. Allows voltage-level translation between

1.8-V, 2.5-V, 3.3-V, and 5-V buses

. No glitch on power-up

. Supports hot insertion

. Low standby current

. Operating power-supply voltage range of 1.65 V to

5.5 V

. 5.5 V Tolerant inputs

. 0 to 400-kHz Clock frequency

. Latch-up performance exceeds 100 mA Per JESD

78

. ESD Protection exceeds JESD 22

. 4000-V Human-body model (A114-A)

. 1500-V Charged-device model (C101)

2 Applications

• Servers

• Routers (telecom switching equipment)

• Factory automation

• Products with I2C slave address conflicts (multiple,

identical temp sensors)

3 Description

The TCA9546A is a quad bidirectional translating

switch controlled via the I2C bus. The SCL/SDA

upstream pair fans out to four downstream pairs, or

channels. Any individual SCn/SDn channel or

combination of channels can be selected, determined

by the contents of the programmable control register.

An active-low reset (RESET) input allows the

TCA9546A to recover from a situation in which one of

the downstream I2C buses is stuck in a low state.

Pulling RESET low resets the I2C state machine and

causes all the channels to be deselected, as does the

internal power-on reset function.

The pass gates of the switches are constructed such

that the VCC pin can be used to limit the maximum

high voltage, which will be passed by the TCA9546A.

This allows the use of different bus voltages on each

pair, so that 1.8-V, 2.5-V, or 3.3-V parts can

communicate with 5-V parts without any additional

protection. External pull-up resistors pull the bus up

to the desired voltage level for each channel. All I/O

pins are 5.5-V tolerant.