TC642BEOATR中文资料微芯科技数据手册PDF规格书

描述 Description

The TC642B/TC647B devices are new versions of the existing TC642/TC647 fan speed controllers. These devices are switch mode, fan speed controllers that incorporate a new fan auto-restart function. Temperature-proportional speed control is accomplished using pulse width modulation. A thermistor (or other voltage output temperature sensor) connected to the VIN input supplies the required control voltage of 1.20V to 2.60V (typical) for 0 to 100 PWM duty cycle. Minimum fan speed is set by a simple resistor divider on the VMIN input. An integrated Start-Up Timer ensures reliable motor start-up at turn-on, coming out of shutdown mode or following a transient fault. A logic-low applied to VMIN (pin 3) causes fan shutdown.

特性 Features

• Temperature-Proportional Fan Speed for Acoustic Noise Reduction and Longer Fan Life

• Efficient PWM Fan Drive

• 3.0V to 5.5V Supply Range:

- Fan Voltage Independent of TC642B/TC647B Supply Voltage

- Supports any Fan Voltage

• FanSense™ Fault Detection Circuit Protects Against Fan Failure and Aids System Testing

• Shutdown Mode for Green Systems

• Supports Low Cost NTC/PTC Thermistors

• Over-Temperature Indication (TC642B only)

• Fan Auto-Restart

• Space-Saving 8-Pin MSOP Package

Applications

• Personal Computers & Servers

• LCD Projectors

• Datacom & Telecom Equipment

• Fan Trays

• File Servers

• General Purpose Fan Speed Control