TC4428数据手册集成电路（IC）的栅极驱动器规格书PDF

描述 Description

The TC4426/4427/4428 are improved versions of the earlier TC426/427/428 family of buffer/gate drivers (with which they are pin compatible). They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5 V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against up to 2 kV of electrostatic discharge. As MOSFET gate drivers, the TC4426/4427/4428 can easily switch 1,000 pF gate capacitances in 25 ns, and provide low enough impedances in both the ON and OFF states to ensure the MOSFETs intended state will not be affected by large transients. However, the recommended pin-compatible drivers are the TC4426A/27A/28A. These gate drivers have matched input to output leading edge and falling edge delays, tD1 and tD2, for processing short duration pulses in the 25 ns range. They are pin compatible with the TC4426/27/28.

特性 Features

Wide Operating Range: 4.5 V to 18 V
High Capacitive Load Drive Capability: 1,000 pF in 25 ns (Typical)
Short Delay Times: 40 ns (Typical)
Consistent Delay Times With Changes in Supply Voltage
With Logic ''1'' Input: 4.5 mA
With Logic ''0'' Input: 400 µA
Low Output Impedance: 7 Ω (Typical)
Latch-Up Protected: Will Withstand > 500 mA Reverse Current, Down to -5 V
Input Will Withstand Negative Inputs
ESD Protected: 2 kV HBM
Pinouts Same as TC426/27/28

简介

TC4428属于集成电路（IC）的栅极驱动器。由制造生产的TC4428栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。