General Description

The TC3401 is a low cost, low power analog-to-digital converter based on Microchip’s Sigma-Delta technology. It will perform 16-bit conversions (15-bit plus sign) at up to eight per second. The TC3401 is optimized for use as a microcontroller peripheral in low cost, battery operated systems. A voltage reference is included, or an external reference can be used. A VDD monitor with a reset generator provides Power-on Reset and Brown out protection while an extra threshold detector is suitable for use as an early warning Power Fail detector, or as a Wake-up Timer.

The TC3401’s 2-wire microPort™ digital interface is used for starting conversions and for reading out the data. Driving the SCLK line low starts a conversion. After the conversion starts, each additional falling edge (up to six) detected on SCLK for t4 seconds reduces the A/D resolution by one bit and cuts conversion time in half. After a conversion is completed, clocking the SCLK line puts the MSB through LSB of the resulting data word onto the SDAT line, much like a shift register. The part automatically sleeps when not performing a data conversion.

The TC3401 is available in a 16-Pin PDIP and a 16-Pin QSOP package.

Features

• 16-bit Resolution at Eight Conversions Per

Second, Adjustable Down to 10-bit Resolution at

512 Conversions Per Second

• 1.8V – 5.5V Operation, Low Power Operating

300µA; Sleep: 50µA

• microPort™ Serial Bus Requires only two

Interface Lines

• Uses Internal or External Reference

• Automatically Enters Sleep Mode when not in use

• True Differential Inputs with Built-In Multiplexer

Provide Ratiometric Conversions

• Early Warning Power Fail Detector, also suitable as

Wake-Up Timer Operational in Shutdown Mode

• VDD Monitor and Reset Generator Operational in

Shutdown Mode

Applications

• Consumer Electronics, Thermostats, CO

Monitors, Humidity Meters, Security Sensors

• Embedded Systems, Data Loggers,

Portable Equipment

• Medical Instruments

TC3401VPE属于集成电路（IC） > 模数转换器（ADC）。微芯科技股份有限公司制造生产的TC3401VPE模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。