TC2054数据手册集成电路（IC）的线性+开关稳压器规格书PDF

描述 Description

The TC2054, TC2055, and TC2186 are high accuracy (typically ±0.4%) CMOS upgrades for older (bipolar) low dropout regulators. Designed specifically for battery-operated systems, the devices’ total supply current is typically 55µA at full load ( 20 to 60 times lower than in bipolar regulators). The devices’ key features include ultra low noise operation, very low dropout voltage - typically 45mV (TC2054); 90mV (TC2055); and 140mV (TC2186) at full load - and fast response to step changes in load. An error output (ERROR) is asserted when the devices are out-of-regulation (due to a low input voltage or excessive output current). Supply current is reduced to 0.5µA (max) and both VOUT and ERROR are disabled when the shutdown input is low. The devices also incorporate over-current protection. The TC2054, TC2055, and TC2186 are stable with a low ESR output capacitor of only 1µF and have a maximum output current of 50mA, 100mA, and 150mA, respectively. This LDO Family also features a fast response time (60msec typically) when released from shutdown.

特性 Features

Extremely Low Supply Current (55 µA typical)
Very Low Dropout Voltage (45 mV typical @ 50 mA)
High Output Voltage Accuracy (±0.4% typical)
Standard or Custom Output Voltages
Power-Saving Shutdown Mode
ERROR Output Can Be Used as a Low Battery Detector, or Processor Reset Generator
Fast Shutdown Response Time (60 µsec typical)
Over-Current Protection
Space-Saving 5-Pin SOT-23A Package
Pin Compatible Upgrades for Bipolar Regulato

简介

TC2054属于集成电路（IC）的线性+开关稳压器。由制造生产的TC2054稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。