TC1173数据手册集成电路（IC）的线性+开关稳压器规格书PDF

描述 Description

The TC1173 is a precision output (typically ±0.5%) CMOS low dropout regulator. Total supply current is typically 50 µA at full load (20 to 60 times lower than in bipolar regulators). TC1173 key features include ultra low noise operation (plus optional Bypass input); very low dropout voltage (typically 240 mV at full load) and internal feed-forward compensation for fast response to step changes in load. An error output (ERROR) is asserted when the TC1173 is out-of-regulation (due to a low input voltage or excessive output current). ERROR can be set as a low battery warning or as a processor RESET signal (with the addition of an external RC network). Supply current is reduced to 0.05 µA (typical) and VOUT and ERROR fall to zero when the shutdown input is low. The TC1173 incorporates both over-temperature and over-current protection. The TC1173 is stable with an output capacitor of only 1 µF and has a maximum output current of 300 mA.

特性 Features

• Low Supply Current for Longer Battery Life
• Very Low Dropout Voltage
• 300 mA Output Current
• Standard or Custom Output Voltages
• ERROR Output Can be Used as a Low Battery Detector or Processor Reset Generator
• Power-Saving Shutdown Mode
• Bypass Input for Ultra-Quiet Operation
• Over-Current and Over-Temperature Protection

简介

TC1173属于集成电路（IC）的线性+开关稳压器。由制造生产的TC1173稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。