TOSHIBA BiCD Integrated Circuit Silicon Monolithic

PWM Chopper-Type Brushed DC Motor driver Features  Monolithic motor driver using BiCD process.  Capable of controlling two brushed DC motor.  2 drive modes (PWM controlled constant current/ direct PWM)  4 operation modes (Clock-wise/Counter clock-wise/Brake/Stop (Off))  Low on-resista

文件：380.99 Kbytes 页数：23 Pages

TOSHIBA

东芝

Toshiba BiCD process integrated circuit silicon monolithic

Brushed DC Motor driver with Dual H-bridge mode Features ・Supporting 50 V, 3.0 A/ch 2 brushed DC motor operation ・Capable of driving two brushed DC motors using dual H-Bridge mode (3.0 A/ch) ・Capable of driving one brushed DC motor with large current, using single H-bridge mode (6.0 A) ・Cur

文件：559.35 Kbytes 页数：25 Pages

TOSHIBA

东芝

PWM Chopper-Type Brushed DC Motor driver

Features ・Monolithic motor driver using BiCD process. ・Capable of controlling two brushed DC motor. ・2 drive modes (PWM controlled constant-current/ direct PWM) ・4 operation modes (Clock-wise/Counter clock-wise/Brake/Stop(Off)) ・Low on-resistance output stage (High side+Low side:0.8Ω(typ.))

文件：1.29347 Mbytes 页数：26 Pages

TOSHIBA

东芝

PWM Chopper-Type Brushed DC Motor driver

Features ・Monolithic motor driver using BiCD process. ・Capable of controlling two brushed DC motor. ・2 drive modes (PWM controlled constant-current/ direct PWM) ・4 operation modes (Clock-wise/Counter clock-wise/Brake/Stop(Off)) ・Low on-resistance output stage (High side+Low side:0.8Ω(typ.))

文件：1.29347 Mbytes 页数：26 Pages

TOSHIBA

东芝

Toshiba BiCD process integrated circuit silicon monolithic

Brushed DC Motor driver with Dual H-bridge mode Features • Supporting large current (9.0 A) and high voltage (50 V) brushed DC motor operation. • Capable of driving two brushed DC motors using dual H-Bridge mode. • Capable of driving one stepping motor using dual H-bridge mode. • Built-in s

文件：476.48 Kbytes 页数：23 Pages

TOSHIBA

东芝

TOSHIBA BiCD Process Integrated Circuit Silicon Monolithic

PWM Chopper Type DC Brushed Motor Driver Features ・ Monolithic IC using BiCD process ・ Capable of PWM constant current drive and direct PWM drive ・ Supporting 4 operation modes, Forward / Reverse / Brake / STOP (OFF) ・ Built-in output MOSFET with Low on-resistance (High side + low side=0.6

文件：390.49 Kbytes 页数：20 Pages

TOSHIBA

东芝

TOSHIBA BiCD Process Integrated Circuit Silicon Monolithic

PWM Chopper Type DC Brushed Motor Driver Features ・ Monolithic IC using BiCD process ・ Capable of PWM constant current drive and direct PWM drive ・ Supporting 4 operation modes, Forward / Reverse / Brake / STOP (OFF) ・ Built-in output MOSFET with Low on-resistance (High side + low side=0.6

文件：391.38 Kbytes 页数：20 Pages

TOSHIBA

东芝

TOSHIBA BiCD Process Integrated Circuit Silicon Monolithic

PWM Chopper Type DC Brushed Motor Driver Features ・ Monolithic IC using BiCD process ・ Capable of PWM constant current drive and direct PWM drive ・ Supporting 4 operation modes, Forward / Reverse / Brake / STOP (OFF) ・ Built-in output MOSFET with Low on-resistance (High side + low side=0.6Ω

文件：394.89 Kbytes 页数：21 Pages

TOSHIBA

东芝

PWM Chopper Type 4 ch H-bridge Motor Driver

Features ● Single-chip brushed DC motor driver for up to 4 motors ● Single-chip bipolar stepping motor driver for up to 2 motors ● Monolithic IC structured by CD process ● Low ON-resistance: Ron = 0.6 Ω In Large mode, H-bridges can be combined. ON-resistance (Ron) = 0.3 Ω. ● Over-current det

文件：626.91 Kbytes 页数：31 Pages

TOSHIBA

东芝

BiCD Constant Current Dual H-bridge Driver IC

Features • BiCD process integrated monolithic IC • Two Built-in H-bridge for output. • Decay modes select function (Slow Decay / Fast Decay) • Power saving function (Sleep mode) • PWM constant current drive • 3.3 V regulator output • BiCD structure: DMOSFET is used for output power transist

文件：515.73 Kbytes 页数：23 Pages

TOSHIBA

东芝