TOSHIBA BiCD Integrated Circuit Silicon Monolithic

BiCD Constant-Current Two-Phase Bipolar Stepping Motor Driver IC Features • Bipolar stepping motor driver • PWM constant-current drive • Allows two-phase, 1-2-phase and W1-2 phase excitations. • BiCD process: Uses DMOS FETs as output power transistors. • High voltage and current: 40 V/2.0

文件：685.94 Kbytes 页数：27 Pages

TOSHIBA

东芝

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

BiCD Constant-Current Two-Phase Bipolar Stepping Motor Driver IC Features • Bipolar stepping motor driver • PWM constant-current drive • Allows two-phase, 1-2-phase and W1-2 phase excitations. • BiCD process: Uses DMOS FETs as output power transistors. • High voltage and current: 40 V/2.0

文件：677.61 Kbytes 页数：28 Pages

TOSHIBA

东芝

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

BiCD Constant-Current Two-Phase Bipolar Stepping Motor Driver IC Features • Bipolar stepping motor driver • PWM constant-current drive • Allows two-phase, 1-2-phase and W1-2 phase excitations. • BiCD process: Uses DMOS FETs as output power transistors. • High voltage and current: 40 V/2.0

文件：471.24 Kbytes 页数：24 Pages

TOSHIBA

东芝

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

BiCD Constant-Current Two-Phase Bipolar Stepping Motor Driver IC Features • Bipolar stepping motor driver • PWM constant-current drive • Allows two-phase, 1-2-phase and W1-2 phase excitations. • BiCD process: Uses DMOS FETs as output power transistors. • High voltage and current: 40 V/2.0

文件：677.61 Kbytes 页数：28 Pages

TOSHIBA

东芝

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

PHASE-in controlled Bipolar Stepping Motor Driver Features ・BiCD process integrated monolithic IC. ・Capable of controlling 1 bipolar stepping motor. ・PWM controlled constant-current drive. ・Allows full, half, quarter step operation. ・Low on-resistance (High + Low side = 0.8 Ω (typ.)) MOSFE

文件：767.55 Kbytes 页数：23 Pages

TOSHIBA

东芝

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

PHASE-in controlled Bipolar Stepping Motor Driver Features ・BiCD process integrated monolithic IC. ・Capable of controlling 1 bipolar stepping motor. ・PWM controlled constant-current drive. ・Allows full, half, quarter step operation. ・Low on-resistance (High + Low side = 0.8 Ω (typ.)) MOSFE

文件：793.45 Kbytes 页数：24 Pages

TOSHIBA

东芝

CLK-in controlled Bipolar Stepping Motor Driver

Features ・BiCD process integrated monolithic IC. ・Capable of controlling 1 bipolar stepping motor. ・PWM controlled constant-current drive. ・Allows full, half, quarter step operation. ・Low on-resistance (High + Low side = 0.8 Ω (typ.)) MOSFET output stage. ・High voltage and current (For spec

文件：542.75 Kbytes 页数：21 Pages

TOSHIBA

东芝

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

CLOCK-in controlled Bipolar Stepping Motor Driver Features ・BiCD process integrated monolithic IC. ・Capable of controlling 1 bipolar stepping motor. ・PWM controlled constant-current drive. ・Allows full, half, quarter step operation. ・Low on-resistance (High + Low side=0.8Ω(typ.)) MOSFET o

文件：767.35 Kbytes 页数：23 Pages

TOSHIBA

东芝

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

PWM method CLK-IN bipolar stepping motor driver Features • Bipolar stepping motor driver • PWM controlled constant-current drive • Clock input control • Allows full, half, quarter ,1/8,1/16, and 1/32 step resolutions • Low on-resistance of output stage by using BiCD process • High Voltage

文件：604.48 Kbytes 页数：27 Pages

TOSHIBA

东芝

Power Management IC for Notebook PC

　■Application 　　　　　This IC will be used in Notebook PC and control power supply lines. 　■Features 　　　　　・Package : 64 pin thinner and compact flat package (LQFP64) 　　　　　・Process : BiCD 0.8um – 40V process 　　　　　・System Structure 　　　　　　1. Constant Current Driver for N-Ch Power MOS-FET Gates (

文件：406.54 Kbytes 页数：48 Pages

TOSHIBA

东芝