TAS6511-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• AEC-Q100 qualified for automotive applications

– Temperature grade 1: –40°C to +125°C, TA

• General operation

– 4.5-V to 18-V supply voltage, 40-V load dump

– Support for 1.8-V and 3.3-V I/O’s

– I2C control with 8 address options

– <0.5-W idle power loss at 14.4 V, <5-uA max

PVDD shutdown loss

• Output current sensing via I2S or TDM

– No need for external circuitry

• Real-time load diagnostics

– Monitor output conditions while playing audio

– Open load, Shorted load, Short-to-power,

Short-to-ground detection

• Integrated DSP processing

– Thermal monitoring and foldback

– PVDD monitoring and foldback

– Clip detection

– Low Latency Path, >70 reduced signal delay

at 48 kHz

• DC and AC Standby load diagnostics

• Audio inputs

– I2S and TDM support up to TDM16

– Input sample rates: 16, 32, 44.1, 48, 96, 192

kHz

• Audio outputs

– 384-kHz to 2-MHz configurable output

switching frequency

– Up to 7-A channel output current

– 30 W (14.4 V, 4 Ω, 10 THD)

– 50 W (14.4 V, 2 Ω, 10 THD)

• Audio Performance

– THD+N <0.01 (4 Ω, 1 W, 1 kHz)

– 109 dB SNR

– Output noise: 35 μVRMS at 14.4 V, A-weighting

• Protection

– Output short protection

– Speaker GuardTM Pro power limiter

– Configurable overtemperature warning and

shutdown

– I2C temperature and supply voltage readout

– DC offset, undervoltage and overvoltage

• Easily meet CISPR25-L5 EMC specification

– Advanced spread-spectrum

2 Applications

• Virtual engine sound system (VESS)

• Emergency call (eCall)

• Automotive head unit

• Telematics control unit

• Automotive cluster display

3 Description

The TAS6511-Q1 is a mono-channel, digital-input,

Class-D audio amplifier that supports 2 MHz switching

frequency enabling a cost and size-optimized singlechannel

solution. The device operates from 4.5 V to

18 V and delivers up to 30 W (14.4 V, 4 Ω, 10

THD+N) and up to 50 W (14.4 V, 2 Ω, 10 THD+N).

The device integrates DC and AC load diagnostics

to determine the status of the connected load before

enabling the output stage. Additionally, the device can

monitor the output load condition while in PLAY mode

with or without audio using real-time load diagnostics

which operates independently from the host and audio

input.

TAS6511-Q1 can monitor the output current, PVDD

voltage, and temperature of the device and

can report this data through TDM or I2S. The

integrated DSP of the TAS6511-Q1 enables advanced

protection features such as PVDD foldback, thermal

foldback, and Speaker Guard™ Pro power limiter.

The DSP also enables an additional low-latency

signal path, providing up to 70 faster signal

processing at 48 kHz for time-sensitive Active Noise

Cancellation (ANC) and Road Noise Cancellation

(RNC) applications.

The device is available in a small pad-down TSSOP

package.

ADVANCE INFORMATION