TAS5028数据手册集成电路（IC）的音频专用规格书PDF

描述 Description

The TAS5028 is an eight channel digital pulse width modulator (PWM) that provides both advanced performance and a high level of system integration. The TAS5028 is designed to interface seamlessly with most audio digital signal processors. The TAS5028 automatically adjusts control configurations in response to clock and data rate changes and idle conditions. This enables the TAS5028 to provide an easy to use control interface with relaxed timing requirements.
The TAS5028 can drive eight channels of H-bridge power stages. Texas Instruments H-bridge parts TAS5111, TAS5112, or TAS5182 + FETs are designed to work seamlessly with the TAS5028. The TAS5028 supports both single-ended or bridge tied load configurations. The TAS5028 also provides a high performance differential output to drive an external differential input analog headphone amplifier (such as the TPA112).
The TAS5028’s uses an AD modulation operating at a 384-kHz switching rate for 48-, 96-, and 192-kHz data. The 8x oversampling combined with the 5th order noise shaper provides a broad flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
The TAS5028 is clock slave only device. The TAS5028 receives MCLK, SCLK and LRCLK from other system components. The TAS5028 accepts master clock rates of 128, 192, 256, 384, 512, and 768 Fs. The TAS5028 accepts a 64-Fs bit clock.

特性 Features

·Audio Input / Output ·Automatic Master Clock Rate and Data Sample Rate Detection
·Eight Serial Audio Input Channels
·Eight PWM Audio Output Channels Configurable as Six Channels With Stereo Line Out or Eight Channels
·Line Output is a PWM Output to Drive an External Differential Input Operational Amplifier
·Headphone PWM Output to Drive an External Differential Amplifier Like the TPA112
·PWM Outputs Support Single Ended and Bridge Tied Loads
·32-, 38-, 44.1-, 48-, 88.2-, 96-, 176.4-, and 192-kHz Sampling Rates
·Data Formats: 16-, 20-, or 24-bit input Data Left, Right and I2S,
·64 x Fs Bit Clock Rate
·128, 192, 256, 384, 512, and 768 x Fs Master Clock Rates (Up to a Maximum of 50 MHz)

·Audio Processing ·48-Bit Processing Architecture With 76 bits of Precision for Most Audio Processing Features
·Volume Control Range +36 dB to – 127 dB ·Master Volume Control Range of +18 dB to –100 dB
·Eight Individual Channel Volume Control Range of +18-dB to –127-dB

·Programmable Soft Volume and Mute Update Rates
·Four Bass and Treble Tone Controls with ±18-dB Range, Selectable Corner Frequencies, and 2nd Order Slopes ·L, R, and C
·LS, RS
·LR, RR
·Sub

·Full 8x8 Input Crossbar Mixer. Each Signal Processing Channel Input Can Be Any Ratio of the Eight Input Channels
·8x2 Output Mixer — Channels 1-6. Each Output Can Be Any Ratio of Any Two Signal Processed Channels
·8x3 Output mixer — Channels 7 and 8. Each Output can be Any Ratio of Any Three Signal Processed Channels
·Three Coefficient Sets Stored on the Device Can be Selected Manually or Automatically (Based on Specific Data Rates)
·DC Blocking Filters
·Able to Support a Variety of Bass Management Algorithms

·PWM Processing ·32-Bit Processing PWM Architecture With 40 Bits of Precision
·8x Oversampling With 5th Order Noise Shaping at 32 – 48 kHz, 4x Oversampling at 88.2 kHz, and 96 kHz and 2x Oversampling at 176.4 kHz and 192 kHz
·>102-dB Dynamic Range
·THD+N
·General Features ·Automated Operation With an Easy to Use Control Interface
·I2C Serial Control Slave Interface
·Integrated AM Interference Avoidance Circuitry
·Single 3.3-V Power Supply
·64-Pin TQFP Package
·5-V Tolerant Inputs