TAC5212-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• ADC channel

– Stereo high performance ADC

– Performance:

• Line differential input dynamic range: 118dB

• Mic differential input dynamic range: 118dB

• THD+N: –95dB

• Channel summing mode supports high SNR

– Input voltage:

• Differential, 2VRMS full-scale inputs

• Single-ended, 1VRMS full-scale inputs

– Input mix / mux options

– Sample rate (fS) = 8kHz to 768kHz

– Programmable microphone bias (Up to 3V)

• DAC channel

– Stereo high performance DAC

– DAC performance:

• DAC to line out dynamic range: 119dB

• DAC to HP out dynamic range: 115dB

• THD+N: –95 dB

– Head phone / line Out output voltage:

• Differential, 2VRMS full-scale

• Single-ended, 1VRMS full-scale

– DAC sample Rates (fs) = 8KHz to 768KHz

• Common features

– Up to 4 record channels

• 2 Channel analog + 2 channel digital

• 1 Channel analog + 3 channel digital

• 4 Channel digital

– Analog input to output by-pass

– Voice activity detection

– Battery protection

– Signal distortion limiter

– Thermal foldback

– Low latency filter selection

– Programmable HPF and biquad filters

– I2C & SPI control interface

– Audio serial interface

• Format: TDM, I2S or left justified

• Word length: 16,20,24 or 32 bits

– Programmable PLL for flexible clocking

– Low power modes

• TBD mW for playback

• TBD mW for record

– Single supply operation: 1.8V or 3.3V

– I/O supply operation: 1.2V or 1.8V or 3.3V

– Temperature grade 1: –40°C ≤ TA ≤ +125°C

2 Applications

• Land Mobile Radio

• IP Network Camera

• IP Telephone

• Video Conference System

• Professional audio mixer/control surface

3 Description

The TAC5212-Q1 is a high performance Stereo

Codec with 2VRMS differential Input, 118dB Stereo

ADC and 2VRMS Stereo DAC. The TAC5212-Q1

supports both differential and Single-ended input and

output. The device supports both Microphone and

Line In input on the ADC Channel. DAC Output can

be configured for either Line Out or Head Phone

Load. TAC5212-Q1 can drive up to 62.5mW into

a Headphone Load. The TAC5212-Q1 integrates

programable channel gain, digital volume control, a

low-jitter phase-locked loop (PLL), a programmable

high-pass filter (HPF), programmable EQ and biquad

filters, low-latency filter modes, and allows for sample

rates up to 768kHz. The TAC5212-Q1 supports timedivision

multiplexing (TDM), I2S, or left-justified (LJ)

audio formats, and can be controlled with I2C or SPI.

These integrated high-performance features, along

with a single supply operation, makes TAC5212-

Q1 an excellent choice for space-constrained audio

applications.