TAC5111-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• Mono low-power audio ADC

– Performance:

• Line/Microphone differential input dynamic

range: 105dB

• THD+N: –97dB

– Input voltage:

• Differential, 2VRMS full-scale input

• Single-ended, 1VRMS full-scale input

– Input mix/mux options

– ADC sample rate (fS) = 4kHz to 768kHz

– Programmable microphone bias (up to 3V)

– Up to 4 Record Channels

• 1 Channel Analog + 3 Channel Digital

• 4 Channel Digital

• Mono differential or Stereo single-ended high

performance audio DAC

– Performance:

• DAC to differential line-out dynamic range:

114dB

• DAC to differential headphone-out dynamic

range: 114dB

• THD+N:–96dB

– Line-out/headphone output voltage :

• Differential, 2VRMS full-scale

• Pseudo-differential, 1VRMS full-scale

• Single-ended, 1VRMS full-scale

– DAC sample rate (fS) = 4kHz to 768kHz

• Common features

– Analog input to output bypass

– Voice activity detection

– Ultrasonic activity detection

– Battery and thermal foldback protection

– Signal distortion limiter

– Low and Ultra-low latency filter options

– Programmable HPF and Biquad filters

– I2C or SPI control interface

– Audio serial interface

• Format: TDM, I2S or Left-justified (LJ)

• Word length: 16, 20, 24 or 32 bits

• Bus controller and target modes

– Programmable PLL for flexible clocking

– Auto clock and sample rate detection

– Low power modes

• 5mW for 1-Ch recording (1.8V Supply)

• 7mW for 1-Ch playback (1.8V Supply)

– Single supply operation AVDD: 1.8V or 3.3V

– I/O supply operation: 1.2V or 1.8V or 3.3V

– Temperature grade 1: –40°C ≤ TA ≤ +125°C

2 Applications

• Land Mobile Radio

• IP Network Camera

• IP Telephone

• Video Conference System

• Smart Speakers

• Professional audio mixer/control surface

3 Description

The TAC5111 is a low-power mono audio codec with

2VRMS differential input, 105dB mono ADC and 2VRMS

differential output, 114dB mono or 1VRMS singleended

output, 107dB stereo DAC. The TAC5111

supports both differential and single-ended inputs

and outputs. The ADC supports both line/microphone

input signals with options for AC or DC coupling

configurations. The DAC outputs can be configured

for either line-output or headphone loads. The DAC

can drive up to 62.5mW into a 16Ω headphone

load. The TAC5111 integrates programable channel

gain, digital volume control, a low-jitter phase-locked

loop (PLL), a programmable high-pass filter (HPF),

programmable EQ and biquad filters, low-latency

and ultra-low latency filter modes, and allows for

sample rates up to 768kHz for both ADC and DAC

signal chains. The TAC5111 supports time-division

multiplexing (TDM), I2S, or left-justified (LJ) audio

formats, and can be controlled with I2C or SPI. These

integrated high-performance features, along with a

single supply operation, makes TAC5111 an excellent

choice for space-constrained audio applications.