Full-Bridge Driver (H-Swithch) for DC Motor (Driver for Switching between Forward and Reverse Rotation)

Features z Output current up to 1.0 A (AVE.), and 3.0 A (PEAK) z Four different modes (forward rotation, reverse rotation, stop, and brake) are supported. z Built-in overcurrent protection and thermal shutdown circuit z Operating voltage range: VCC (opr.) = 6 to 18 V, VS (opr.) = 0 to 18 V z

文件：398.18 Kbytes 页数：13 Pages

TOSHIBA

东芝

5.8W DUAL AUDIO POWER AMPLIFIER

5.8W AUDIO POWER AMPLIFIER. 19W BTL AUDIO POWER AMPLIFIER. The TA7270P/TA7271P are dual audio power amplifier for consumer applications. It is designed for high power, low distorion and low noise. It also contains various kind of protectors. Its suitable for car-audioj power amplifier with h

文件：398.96 Kbytes 页数：11 Pages

TOSHIBA

东芝

5.8W DUAL AUDIO POWER AMPLIFIER

5.8W AUDIO POWER AMPLIFIER. 19W BTL AUDIO POWER AMPLIFIER. The TA7270P/TA7271P are dual audio power amplifier for consumer applications. It is designed for high power, low distorion and low noise. It also contains various kind of protectors. Its suitable for car-audioj power amplifier with h

文件：398.96 Kbytes 页数：11 Pages

TOSHIBA

东芝

DUAL POWER OPERATIONAL AMPLIFIER

DUAL POWER OPERATIONAL AMPLIFIER The TA7272P is a dual power operational amplifier. It is intended for use especially DC MOTOR positioning system applications, such as Arm Driver (for Audiodisk Players), head or voice coil motor drivers (for Floppy and Winchester Disk Drivers) and any other power

文件：354.96 Kbytes 页数：10 Pages

TOSHIBA

东芝

DUAL POWER OPERATIONAL AMPLIFIER

DUAL POWER OPERATIONAL AMPLIFIER The TA7272P is a dual power operational amplifier. It is intended for use especially DC MOTOR positioning system applications, such as Arm Driver (for Audiodisk Players), head or voice coil motor drivers (for Floppy and Winchester Disk Drivers) and any other power

文件：354.96 Kbytes 页数：10 Pages

TOSHIBA

东芝

12W BTL AUDIO POWER AMPLIFIER

12W BTL AUDIO POWER AMPLIFIER The TA7274P is audio power amplifier for consumer application. This IC is applying BTL system in which output coupling condenser and bootstrap condenser are not necessary and output 12W (VCC=13.2V, RL=4Ω, THD=10) can be obtained. Since the package is a 7 pin SIP, (

文件：624.5 Kbytes 页数：9 Pages

TOSHIBA

东芝

DUAL BRIDGE DRIVER

The TA7279P and TA7279AP can control a DC motor in four modes (forward rotation, reverse rotation, stop, and brake), using their bridge driver best suited for switching between forward and reverse rotation. These ICs can deliver an output current of 1.0 A (AVE.) and 3.0 A (PEAK). They can adjus

文件：265.13 Kbytes 页数：8 Pages

TOSHIBA

东芝

DUAL BRIDGE DRIVER

The TA7279P and TA7279AP can control a DC motor in four modes (forward rotation, reverse rotation, stop, and brake), using their bridge driver best suited for switching between forward and reverse rotation. These ICs can deliver an output current of 1.0 A (AVE.) and 3.0 A (PEAK). They can adjus

文件：265.13 Kbytes 页数：8 Pages

TOSHIBA

东芝

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

文件：646.27 Kbytes 页数：13 Pages

TOSHIBA

东芝

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

文件：646.27 Kbytes 页数：13 Pages

TOSHIBA

东芝