DUAL POWER OPERATIONAL AMPLIFIER

DUAL POWER OPERATIONAL AMPLIFIER The TA7272P is a dual power operational amplifier. It is intended for use especially DC MOTOR positioning system applications, such as Arm Driver (for Audiodisk Players), head or voice coil motor drivers (for Floppy and Winchester Disk Drivers) and any other power

文件：354.96 Kbytes 页数：10 Pages

TOSHIBA

东芝

12W BTL AUDIO POWER AMPLIFIER

12W BTL AUDIO POWER AMPLIFIER The TA7274P is audio power amplifier for consumer application. This IC is applying BTL system in which output coupling condenser and bootstrap condenser are not necessary and output 12W (VCC=13.2V, RL=4Ω, THD=10) can be obtained. Since the package is a 7 pin SIP, (

文件：624.5 Kbytes 页数：9 Pages

TOSHIBA

东芝

DUAL BRIDGE DRIVER

The TA7279P and TA7279AP can control a DC motor in four modes (forward rotation, reverse rotation, stop, and brake), using their bridge driver best suited for switching between forward and reverse rotation. These ICs can deliver an output current of 1.0 A (AVE.) and 3.0 A (PEAK). They can adjus

文件：265.13 Kbytes 页数：8 Pages

TOSHIBA

东芝

DUAL BRIDGE DRIVER

The TA7279P and TA7279AP can control a DC motor in four modes (forward rotation, reverse rotation, stop, and brake), using their bridge driver best suited for switching between forward and reverse rotation. These ICs can deliver an output current of 1.0 A (AVE.) and 3.0 A (PEAK). They can adjus

文件：265.13 Kbytes 页数：8 Pages

TOSHIBA

东芝

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

文件：646.27 Kbytes 页数：13 Pages

TOSHIBA

东芝

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

文件：646.27 Kbytes 页数：13 Pages

TOSHIBA

东芝

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

文件：646.27 Kbytes 页数：13 Pages

TOSHIBA

东芝

LOW FREQUENCY POWER AMPLIFIER

文件：729.78 Kbytes 页数：10 Pages

TOSHIBA

东芝

DUAL BRIDGE DRIVER

The TA7288P is a bridge driver that is ideal for normal / reverse switching. This circuit offers four modes: normal rotation, reverse rotation, stop, and brake. The output current is 1.0 A (AVE.) and 2.0 A (PEAK). TA7288P has an ideal circuit configuration for VCR front tape loading and offers

文件：279.11 Kbytes 页数：8 Pages

TOSHIBA

东芝

PWM STEPPING MOTOR DRIVER

PWM STEPPING MOTOR DRIVER The TA7289P, TA7289F/FG are PWM solenoid driver designed especially for use high efficiency stepping motor control. It consist of 1.5A peak current drive capable output full bridge driver, oscillation circuit for PWM switching, 4bit D−A for output current control and

文件：552.04 Kbytes 页数：15 Pages

TOSHIBA

东芝