丝印：T86；Package：SOT753；2-input EXCLUSIVE-OR gate

1. General description The 74HC1G86; 74HCT1G86 is a single 2-input EXCLUSIVE-OR gate. Inputs also include clamp diodes, this enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits • Wide supply voltage range from 2.0 V to 6.0 V

文件：208.73 Kbytes 页数：11 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：T86；Package：SOT765-1；Dual 2-input EXCLUSIVE-OR gate

1. General description The 74HC2G86; 74HCT2G86 is a dual 2-input EXCLUSIVE-OR gate. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits • Wide supply voltage range from 2.0 V to 6.0 V • Input

文件：214.16 Kbytes 页数：11 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：T86；Package：SOT765-1；Dual 2-input EXCLUSIVE-OR gate

1. General description The 74HC2G86-Q100; 74HCT2G86-Q100 is a dual 2-input EXCLUSIVE-OR gate. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (A

文件：214.16 Kbytes 页数：11 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：T86；Package：SC-88A；TinyLogic HST 2-Input Exclusive-OR Gate

Description The NC7ST86 is a single 2−Input high performance CMOS Exclusive−OR Gate, with TTL−compatible inputs. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation. ESD protection diodes inherently guard both inputs and outputs with respect to the VCC an

文件：318.49 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

丝印：T86；Package：SC-88A；TinyLogic HST 2-Input Exclusive-OR Gate

Description The NC7ST86 is a single 2−Input high performance CMOS Exclusive−OR Gate, with TTL−compatible inputs. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation. ESD protection diodes inherently guard both inputs and outputs with respect to the VCC an

文件：318.49 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

丝印：T86；Mini-molded chip LEDs

The recommended thickness of the screen mask for soldering is between 100 and 200μm. The hole size of the screen mask should be same as the recommended land pattern or smaller.

文件：881.29 Kbytes 页数：3 Pages

ROHM

罗姆

丝印：T86；Mini-molded chip LEDs

The recommended thickness of the screen mask for soldering is between 100 and 200μm. The hole size of the screen mask should be same as the recommended land pattern or smaller.

文件：881.29 Kbytes 页数：3 Pages

ROHM

罗姆

丝印：T86；Mini-molded chip LEDs

The recommended thickness of the screen mask for soldering is between 100 and 200μm. The hole size of the screen mask should be same as the recommended land pattern or smaller.

文件：881.29 Kbytes 页数：3 Pages

ROHM

罗姆

丝印：T86；Mini-molded chip LEDs

The recommended thickness of the screen mask for soldering is between 100 and 200μm. The hole size of the screen mask should be same as the recommended land pattern or smaller.

文件：881.29 Kbytes 页数：3 Pages

ROHM

罗姆

丝印：T86；Mini-molded chip LEDs

The recommended thickness of the screen mask for soldering is between 100 and 200μm. The hole size of the screen mask should be same as the recommended land pattern or smaller.

文件：881.29 Kbytes 页数：3 Pages

ROHM

罗姆