TXRX_982_R1 Evaluation Board

SY88973/SY88982/MIC3001-Based SFP Module General Description This evaluation board is an implementation of the SFP module in a different form factor with on board faults indicators (LEDs) and a DB-25 connector for serial communication. The design uses Micrels MIC3001 controller, SY88982 (pin com

文件：1.98314 Mbytes 页数：10 Pages

Micrel

麦瑞半导体

3.3V 3.2Gbps CML Low Power Limiting Post Amplifier with TTL LOS

General Description The SY88973BL low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The

文件：539.77 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

3.3V 3.2Gbps CML Low Power Limiting Post Amplifier with TTL LOS

General Description The SY88973BL low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The

文件：539.77 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

3.3V 3.2Gbps CML Low Power Limiting Post Amplifier with TTL LOS

General Description The SY88973BL low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The

文件：539.77 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER W/TTL LOS

DESCRIPTION The SY88973V low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects o typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88973V q

文件：123.33 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

LOW-POWER LIMITING POST AMPLIFIER WITH TTL LOS

DESCRIPTION The SY88773V low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88773V

文件：120.86 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER W/TTL LOS

DESCRIPTION The SY88973V low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects o typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88973V q

文件：123.33 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER W/TTL LOS

DESCRIPTION The SY88973V low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects o typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88973V q

文件：123.33 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER W/TTL LOS

DESCRIPTION The SY88973V low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects o typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88973V q

文件：123.33 Kbytes 页数：11 Pages

Micrel

麦瑞半导体

3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER W/TTL LOS

DESCRIPTION The SY88973V low-power, limiting post amplifier is designed for use in fiber optic receivers. The device connects o typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88973V q

文件：123.33 Kbytes 页数：11 Pages

Micrel

麦瑞半导体