SY88432L中文资料Transceivers数据手册Microchip规格书

描述 Description

The SY88432L is a low power transceiver device that integrates a 4.25Gbps FP/DFB laser diode driver with a wide-sensitivity limiting post amplifier. This low power device is designed for use in fiber-optic optical modules for multi-rate applications up to 4.25Gbps.The SY88432L transmitter section can output up to 60mA of modulation current with fast rise and fall times and is designed to be AC-coupled to the laser. The transmitter output stage incorporates a transmit disable feature and integrated 50Ω input impedance referenced to VCC.The receiver section’s limiting post amplifier connects to a typical trans-impedance amplifier (TIA) to amplify the incoming weak signal from the ROSA and outputs normalized received data in CML format at the output.The receiver offers a wide LOS (loss of signal) range and is able to detect input signals of as low as 5mVpp and as high as 80mVpp. A programmable loss-of-signal level set pin (LOSLVL) sets the sensitivity of the input amplitude detection. The LOS or SD (signal-detect) is user selectable and the LOS/SD signal can be fed back to the JAM input to implement the SQUELCH function that maintains output stability under a loss-of-signal condition. The receiver input should be AC-coupled.The SY88432L interfaces with Micrel’s highly advanced optical module controller MIC3003 as an easy-to-use chipset solution for CSFP/SFP/CSFF/SFF optical module applications. The MIC3003 allows for both modulation and bias current control, with automatic power control (APC) and temperature compensation. The SY88432L operates on a single 3.3V power supply and is available in a 24 lead, 4mm x 4mm QFN package.

特性 Features

Multi-rate operation up to 4.25Gbps
Single, wide range power supply: 3.3V ±10%
Industrial temp range: -40°C to +85°C
MIC3003 compatible
Transmitter – FP/DFP Laser Diode Driver
Modulation current up to 60mA
AC coupled laser diode modulation
Voltage controlled modulation current
Rise/Fall times 65ps (typical)
TX Disable with internal 75kΩ pull down resistor
Integrated 50&Omega input impedance to VCC
Receiver – Limiting Post Amplifier
Wide differential input range (5mVpp – 1800mVpp)
Wide LOS range (8mVpp – 80mVpp) with 3.5dB typical electrical hysteresis
Programmable LOS level (LOSLVL) sensitivity
Selectable LOS or SD output
TTL compatible JAM input with internal pull up
Low-noise CML data outputs with integrated 50Ω termination impedance
Rise/Fall times 60ps (typical)
Low-noise CML data inputs with integrated 50Ω termination impedance to internal reference VREF

简介

SY88432L属于集成电路（IC）的激光驱动器。由制造生产的SY88432L激光驱动器激光驱动器电源管理集成电路 (PMIC) 可用于提供一个或多个受控电流源，以从标称恒定电压电源为半导体激光器件供电。产品通常支持通过监控受驱动的激光器件发出的光功率而得到反馈，可广泛应用于光通信系统中；并因具有对提供给用电设备的电流进行高频调制的能力，而与执行类似功能的器件区分开来。