SY88343HL中文资料High Speed Communication Limiting Amplifiers Products数据手册Microchip规格书

描述 Description

The SY88343HL low-power, high-sensitivity, limiting, post amplifier is designed for use in fiber-optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88343HL quantizes these signals and outputs CML level waveforms.

The SY88343HL operates from a single +3.3V power supply, over temperatures ranging from -40°C to +85°C. With its wide bandwidth, high gain, and signals with data rates up to 3.2Gbps and as small as 4mVPP, it can be amplified to drive devices with CML/PECL inputs

The SY88343HL generates a high-gain loss-of-signal (LOS) open-collector TTL output. This function has a high-gain input stage for increased LOS sensitivity. A programmable loss-of-signal level set pin (LOS LVL) sets the sensitivity of the input amplitude detection. LOS asserts high if the input amplitude falls below the threshold set by LOS LVL and de-asserts low otherwise. The enable bar input (/EN) de-asserts the true output signal without removing the input signal. The LOS output can be fed back to the /EN input to maintain output stability under a loss-of-signal condition. Typically, 3.5dB LOS hysteresis is provided to prevent chattering.

特性 Features

High input sensitivity: 4mVPP
Single 3.3V power supply
155Mbps to 3.2Gbps operation
Ideal for multi-rate applications
Low-noise CML data outputs
High-sensitivity Loss-of-signal (LOS) detection
Chatter-free open-collector TTL Loss-of-Signal (LOS) output with internal 4.75kΩ pull-up resistor
TTL /EN input
Programmable LOS level set (LOS LVL)
Available in a tiny (3mm x 3mm) 16-pin MLF® package