SW3中文资料4DSystems数据手册PDF规格书

描述 Description

The uOLED-160G2 is an impressive OLED display module in the 4D Systems microOLED graphics display range. Combining a resolution of 1.7” 160x128 pixels with 65K True to Life colours, this display module is perfect for animations, slideshows and other multimedia presentations. It is the ideal size for attractive embedded display applications.

This module brings to life a breath-taking 1.7” Passive Matrix OLED (PMOLED) screen, which is the biggest uOLED module available in its range. Driving the module and its peripherals is the GOLDELOX processor, a very capable chip which provides impressive graphics power, programmed with 4D Systems Workshop IDE Software.

4D Systems Workshop enables graphic solutions to be constructed rapidly and with ease due to its design

being solely for 4D’s graphics controllers.

The uOLED-160G2 has a modest but comprehensive range of features suited for an application requiring a bright eye catching display, an analog input, Dallas 1-wire sensor capability, audio generation, or simply digital I/O. This is truly an impressive little module.

特性 Features

• Low-cost 1.7” OLED display graphics user interface solution.

• 160 x 128 resolution, RGB 65K true to life colours, PMOLED Screen.

• No back lighting with near 180° viewing angle.

• Easy 10 pin interface to any host device: 3.3Vout, IO2, GND, IO1, RESET, GND, RX, TX, +5V, 5V OUT

• Powered by the 4D-Labs GOLDELOX processor (also available as separate OEM IC).

• 10KB of flash memory for user code storage and 510 bytes of RAM for user variables (255 x 16bit vars).

• Asynchronous hardware serial UART port with auto-baud, TTL interface, with 300 to 600K baud

• 2 x General Purpose I/O pins.

• IO1 supports:

◦ Digital I/O

◦ A/D Converter with 8/0 bit resolution

◦ Complex sound generation

◦ Dedicated RTTTL tune engine

◦ Multi-Switch Joystick, Buttons

◦ Dallas 1-Wire

• IO2 supports:

◦ Digital I/O

◦ Complex sound generation

◦ Dedicated RTTTL tune engine

• On board micro-SD memory card adaptor for multimedia storage and data logging purposes. HC memory card support is also available for cards larger than 4GB.

• Built in extensive 4DGL graphics and system library functions

• Display full colour images, animations, icons and video clips (no audio support for video).

• Supports all available Windows fonts and characters (imported as external fonts).

• 4.0V to 5.5V range operation (single supply), nominal 5.0V.

• Module dimensions: 52.1 x 36.0 x 13.8 mm (including mounting tabs and header pins)

• Weight ~ 13g.

• Display Viewing Area: 33.6 x 27.0 mm

• RoHS Compliant.