STWBC86

符合Qi标准的感应式无线电源发射器，支持最高5W应用; • WPC Qi 1.2.4 compatible Power Class 0 BPP \n• Power Tx reference design based on A11a topology \n• Up to 5W output power transfer on the receiver side \n• Wide input voltage range 4.75V to 20V \n• Monolithic solution with integrated Half-bridge/Full-bridge inverter and drivers for high efficiency and low BOM \n• 32-bit, 64MHz ARM Cortex micro controller with 8KB SRAM \n• FTP (Few Times Programmable) for Firmware patching and advanced features \n• On-chip current sense• 10-bit A/D converter \n• I2C interface \n• Fully Configurable GPIOs \n• Accurate voltage/current measurements for FOD \n• Current limit and Thermal protection \n• Robust ASK,FSK communication \n• Flip chip 72 bumps (3.26mm x 3.67mm);

The STWBC86 is a highly integrated monolithic wireless power transmitter solution suitable for applications up to 5W.\n\n This solution requires low external BOM count. Because of the integrated low impedance Full/Half bridge inverter, STWBC86 achieves high efficiency and low power dissipation. \n\n I2C interface allows firmware and platform parameters to be customized and the device can be configured using the embedded FTP.\n\n Additional firmware patching also improves application flexibility of STWBC86.\n\n The Flip Chip package and low BOM count make the device suitable for very compact applications.\n\n

STWBC86

Qi compatible wireless power transmitter for 5W applications with integrated full bridge

Features •WPCQi1.2.4compatiblePowerClass0BPP •PowerTxreferencedesignbasedonA11atopology •Upto5Woutputpowertransferonthereceiverside •Wideinputvoltagerange4.75Vto20V •MonolithicsolutionwithintegratedHalf-bridge/Full-bridgeinverteranddriversfor highef

STWBC86JR

Qi compatible wireless power transmitter for 5W applications with integrated full bridge

Features •WPCQi1.2.4compatiblePowerClass0BPP •PowerTxreferencedesignbasedonA11atopology •Upto5Woutputpowertransferonthereceiverside •Wideinputvoltagerange4.75Vto20V •MonolithicsolutionwithintegratedHalf-bridge/Full-bridgeinverteranddriversfor highef

STWBC86JR

5W Wireless Power Transmitter; • Up to 5 W output power transfer on the receiver side \n• Monolithic solution with integrated Half-bridge/Full-bridge inverter and drivers for high efficiency and low BOM \n• 32-bit, 64 MHz Arm® Cortex® M0+ core \n• On-chip current sense \n• I2C target interface for host controller \n• Configurable GPIOs \n• Accurate voltage/current measurements for FOD \n• Current limit and thermal protection \n• Robust ASK demodulation, FSK modulation for communication \n• Package: WLCSP72 8 x 9 Ball (3.26 mm x 3.67 mm x 0.57 mm) pitch 0.4 mm;

The STWBC86JR is a highly integrated monolithic wireless power transmitter solution suitable for applications up to 5 W.\n\n This solution requires a low external BOM count. Because of the integrated low impedance Full/Half bridge inverter, STWBC86JR achieves high efficiency and low-power dissipation. \n\n The i2c interface allows firmware and platform parameters to be customized and the device can be configured using the embedded FTP.\n\n Additional firmware patching also improves the application flexibility of STWBC86JR.\n\n The flip chip package and low BOM count make the device suitable for very compact applications.

STWD100NYWY3F

ST/意法
SOT23-5

ST/意法