STULPI01BTBR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

STULPI01BTBR属于集成电路（IC）的驱动器接收器收发器。由意法半导体集团制造生产的STULPI01BTBR驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

描述 Description

The STULPI01 is a high speed USB 2.0 transceiver compliant with ULPI (UTMI+ low pin interface) and OTG (On-The-Go) specifications, providing a complete physical layer solution for any high speed USB host, device or OTG dual role core. It allows USB ASICs to interface with the physical layer of the USB through a 12-pin interface. It contains VBUS comparators, ID line detector, USB differential driver and receivers and complete ULPI register map and interrupt generator. The STULPI01 transceiver is suitable for mobile applications and battery powered devices because of its low power consumption, power down operating mode and minimal die/package dimensions.

特性 Features

■ USB-IF high speed certified to the Universal Serial Bus specification Rev 2.0.

■ Meets the requirements of the Universal Serial Bus specification revision 2.0, On-The-Go supplement to the USB 2.0 specification 1.0a and ULPI transceiver specification 1.1.

■ Standard ULPI (UTMI+ low pin interface) 1.1 digital interface.

■ Fully compliant with ULPI 1.1 register set.

■ External square wave clock with 1V8VIO amplitude must be applied to oscillator input XI.

■ Supports 480 Mbit/s high speed, 12 Mbit/s full speed and 1.5 Mbit/s low speed modes of operation.

■ Supports 2.7 V UART mode.

■ Supports session request protocol (SRP) and host negotiation protocol (HNP) for dual-role device features.

■ Ability to control external charge pump for higher VBUS currents.

■ Single supply, +3 V to +4.5 V voltage range.

■ Integrated dual voltage regulator to supply internal circuits with stable 3.3 V and 1.2 V.

■ Integrated over current detector.

■ Integrated HS termination and FS/LS/OTG pull-up/pull-down resistors.

■ Integrated USB 2.0 “short-circuit withstand” protection.

■ Power down mode with very low power consumption for battery-powered devices.

■ Ideal for system ASICs with built-in USB host, device or OTG cores.

■ Available in µTFBGA36 RoHS package.

■ -40 °C to 85 °C operating temperature range.

Applications

■ Mobile phones

■ PDAs

■ MP3 players

■ Digital still cameras

■ Set top box

■ Portable navigation devices