STM6905中文资料Quintuple, ultralow voltage supervisor with push-button reset数据手册ST规格书

描述 Description

The STM6905 supervisor is a low voltage/low supply current processor supervisor, designed to monitor up to five system power supply voltages. This device is targeted at applications such as set-top boxes (STBs), portable, battery-powered systems, networking and communication systems.
The device supports a push-button type manual reset input (MR). Two of the five supply monitors (VCCand V2IN) have fixed (customer-selectable, factory-trimmed) thresholds (VRST1and VRST2). The other three voltage monitor inputs (V3IN, V4IN and V5IN) are monitored using externally adjustable threshold (600 mV internal reference) to meet specific level requirements.
If any of the five monitored voltages drops below its factory-trimmed or adjustable thresholds, or if the MRis asserted to logic low, the reset output RSTis asserted (driven low). Once asserted, RSTis maintained low for a minimum delay period (tREC) after ALL monitored supplies rise above their respective thresholds and MRreturns to high. The reset output logic state is valid for VCCgreater than 0.8 V.
The STM6905 is available in a standard 8-lead MSOP (TSSOP) package.

特性 Features

• Quintuple voltage monitoring
• Accurate ±1.8 % across temperature voltage threshold (±1 % at 25 °C)
• Primary supply (VCC) monitor. Fixed (factory -programmed) reset thresholds: 3.078 V to 2.866 V
• Second fixed (V2IN) monitor. Fixed (factory-programmed) reset thresholds: 2.333 V to 1.050 V
• Three additional adjustable supply monitor inputs (externally adjustable)
• 600 mV internal reference
• RSToutput (open drain)
• Output guaranteed for VCC ≥ 0.8 V
• Reset delay time (TREC) on power-up: 210 ms (typ)
• Manual reset input (MR)
• Low supply current of 12 μA (typ)
• Power supply voltage 0.8 V to 5.5 V
• RoHS compliant (green package)
• 8-pin MSOP/TSSOP
• Operating temperature: –40 °C to 85 °C (industrial grade)

简介

STM6905属于集成电路（IC）的监控器。由制造生产的STM6905监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。