STM32MP135F-DK中文资料意法半导体数据手册PDF规格书

Features

• STM32MP135FAF7 MPU with an Arm® Cortex®‑A7 32-bit processor at 1 GHz,

in a TFBGA320 package

• ST PMIC STPMIC1

• 4-Gbit DDR3L, 16 bits, 533 MHz

• 4.3 480×272 pixels LCD display module with capacitive touch panel and RGB

interface

• UXGA 2-megapixel CMOS camera module (included) with MIPI CSI-2® / SMIA

CCP2 deserializer

• Wi‑Fi® 802.11b/g/n

• Bluetooth® Low Energy 4.1

• Dual 10/100 Mbit/s Ethernet (RMII) compliant with IEEE-802.3u, one with

Wake on LAN (WoL) support

• USB Host 4-port hub

• USB Type-C® DRP based on an STM32G0 device

• 4 user LEDs

• 4 push-buttons (2× user, tamper, and reset)

• 1 wake-up button

• Board connectors:

– Dual-lane MIPI CSI-2® camera module expansion

– 2× Ethernet RJ45

– 4× USB Type-A

– USB Micro-B

– USB Type-C®

– microSD™ card holder

– GPIO expansion

– 5 V / 3 A USB Type-C® power supply input (charger not provided)

– VBAT for power backup

• On-board current measurement

• On-board STLINK-V3E debugger/programmer with USB re-enumeration

capability: mass storage, Virtual COM port, and debug port

• Full mainline open-source Linux® STM32 MPU OpenSTLinux Distribution

(such as STM32MP1Starter) software and examples

• Support of several Integrated Development Environments (IDEs) including

STM32CubeIDE

• Bare metal support for RTOS (Microsoft® Azure®)