STM32L432KC数据手册ST中文资料规格书

描述 Description

The STM32L432xx devices are the ultra-low-power microcontrollers based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32L432xx devices embed high-speed memories (Flash memory up to 256 Kbyte, 64 Kbyte of SRAM), a Quad SPI flash memories interface and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

The STM32L432xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.

The devices offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, two DAC channels, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.

In addition, up to 3 capacitive sensing channels are available.

They also feature standard and advanced communication interfaces.

The STM32L432xx operates in the -40 to +85 °C (+105 °C junction), -40 to +105 °C (+125 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.

Some independent power supplies are supported: analog independent supply input for ADC, DAC, OPAMP and comparators

The STM32L432xx family offers a single 32-pin package.

特性 Features

• Ultra-low-power with FlexPowerControl
•1.71 V to 3.6 V power supply
•-40 °C to 85/105/125 °C temperature range
•8 nA Shutdown mode (2 wakeup pins)
•28 nA Standby mode (2 wakeup pins)
•280 nA Standby mode with RTC
•1.0 μA Stop 2 mode, 1.28 μA with RTC
•84 μA/MHz run mode
•Batch acquisition mode (BAM)
•4 μs wakeup from Stop mode
•Brown out reset (BOR)
•Interconnect matrix
• Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions
• Performance benchmark
•1.25 DMIPS/MHz (Drystone 2.1)
•273.55 CoreMark® (3.42 CoreMark/MHz @ 80 MHz)
• Energy benchmark
•176.7 ULPBench® score
• Clock Sources
•32 kHz crystal oscillator for RTC (LSE)
•Internal 16 MHz factory-trimmed RC (±1%)
•Internal low-power 32 kHz RC (±5%)
•Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)
•Internal 48 MHz with clock recovery
•2 PLLs for system clock, USB, audio, ADC
• Up to 26 fast I/Os, most 5 V-tolerant
• RTC with HW calendar, alarms and calibration
• Up to 3 capacitive sensing channels
• 11x timers: 1x 16-bit advanced motor-control, 1x 32-bit and 2x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer
• Memories
•Up to 256 KB single bank Flash, proprietary code readout protection
•64 KB of SRAM including 16 KB with hardware parity check
•Quad SPI memory interface
• Rich analog peripherals (independent supply)
•1x 12-bit ADC 5 Msps, up to 16-bit with hardware oversampling, 200 μA/Msps
•2x 12-bit DAC output channels, low-power sample and hold
•1x operational amplifier with built-in PGA
•2x ultra-low-power comparators
• 14x communication interfaces
•USB 2.0 full-speed crystal less solution with LPM and BCD
•1x SAI (serial audio interface)
•2x I2C FM+(1 Mbit/s), SMBus/PMBus
•3x USARTs (ISO 7816, LIN, IrDA, modem)
•1x LPUART (Stop 2 wake-up)
•2x SPIs (and 1x Quad SPI)
•CAN (2.0B Active)
•SWPMI single wire protocol master I/F
•IRTIM (Infrared interface)
• 14-channel DMA controller
• True random number generator
• CRC calculation unit, 96-bit unique ID
• Development support: serial wire debug (SWD), JTAG, Embedded Trace Macrocell™
• All packages are ECOPACK2® compliant