STM32L162VD中文资料超低功耗Arm Cortex-M3 MCU，具有384-KB Flash存储器、32 MHz CPU、LCD、USB、3x运算放大器和AES数据手册ST规格书

描述 Description

The ultra-low-power STM32L162xD devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 384 Kbytes and RAM up to 48 Kbytes), a flexible static memory controller (FSMC) interface (for devices with packages of 100 pins and more) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The STM32L162xD devices offer three operational amplifiers, one 12-bit ADC, two DACs, two ultra-low-power comparators, AES, one general-purpose 32-bit timer, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L162xD devices contain standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2S, one SDIO, three USARTs, two UARTs and an USB. The STM32L162xD devices offer up to 34 capacitive sensing channels to simply add a touch sensing functionality to any application.

They also include a real-time clock and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.

The ultra-low-power STM32L162xD devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.

特性 Features

• Includes ST state-of-the-art patented technology
•Ultra-low-power platform
• 1.65 V to 3.6 V power supply
• -40°C to 105°C temperature range
• 305 nA Standby mode (3 wakeup pins)
• 1.15 µA standby mode + RTC
• 0.475 µA Stop mode (16 wakeup lines)
• 1.35 µA Stop mode + RTC
• 11 µA Low-power run mode
• 230 µA/MHz Run mode
• 10 nA ultra-low I/O leakage
• 8 µs wakeup time

•AES-128 bit encryption hardware accelerator
•Core: Arm® Cortex®-M3 32-bit CPU
• From 32 kHz up to 32 MHz max
• 1.25 DMIPS/MHz (Dhrystone 2.1)
• Memory protection unit

•Reset and supply management
• Low-power, ultrasafe BOR (brownout reset) with 5 selectable thresholds
• Ultra-low-power POR/PDR
• Programmable voltage detector (PVD)

•Clock sources
• 1 to 24 MHz crystal oscillator
• 32 kHz oscillator for RTC with calibration
• High speed internal 16 MHz factory-trimmed RC (+/- 1%)
• Internal low power 37 kHz RC
• Internal multispeed low power 65 kHz to 4.2 MHz
• PLL for CPU clock and USB (48 MHz)

•Pre-programmed bootloader
• USB and USART supported

•Development support
• Serial wire debug supported
• JTAG and trace supported

•Up to 116 fast I/Os (102 I/Os 5V tolerant), all mappable on 16 external interrupt vectors
•Memories
• 384 Kbytes of Flash memory with ECC (with 2 banks of 192 Kbytes enabling Rww capability)
• 48 Kbytes of RAM
• 12 Kbytes of true EEPROM with ECC
• 128-byte backup register
• Memory interface controller supporting SRAM, PSRAM and NOR Flash

•LCD driver for up to 8x40 segments
• Support contrast adjustment
• Support blinking mode
• Step-up converter on board

•Rich analog peripherals (down to 1.8V)
• 3x operational amplifiers
• 12-bit ADC 1 Msps up to 40 channels
• 12-bit DAC 2 ch with output buffers
• 2x ultra-low-power comparators(window mode and wakeup capability)

•DMA controller 12x channels
•12x peripheral communication interfaces
• 1x USB 2.0 (internal 48 MHz PLL)
• 5x USARTs
• Up to 8x SPIs (2x I2S, 3x 16 Mbit/s)
• 2x I2Cs (SMBus/PMBus)
• 1x SDIO interface

•11x timers: 1x 32-bit, 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window)
•Up to 34 capacitive sensing channels
•CRC calculation unit, 96-bit unique ID