STM32L152C8-A中文资料意法半导体数据手册PDF规格书

Features

• Ultra-low-power platform

– 1.65 V to 3.6 V power supply

– -40°C to 105°C temperature range

– 0.28 μA Standby mode (3 wakeup pins)

– 1.11 μA Standby mode + RTC

– 0.44 μA Stop mode (16 wakeup lines)

– 1.38 μA Stop mode + RTC

– 10.9 μA Low-power Run mode

– 185 μA/MHz Run mode

– 10 nA ultra-low I/O leakage

– < 8 μs wakeup time

• Core: ARM® Cortex®-M3 32-bit CPU

– From 32 kHz up to 32 MHz max

– 1.25 DMIPS/MHz (Dhrystone 2.1)

– Memory protection unit

• Reset and supply management

– Ultra-safe, low-power BOR (brownout

reset) with 5 selectable thresholds

– Ultra-low-power POR/PDR

– Programmable voltage detector (PVD)

• Clock sources

– 1 to 24 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– High Speed Internal 16 MHz factorytrimmed

RC (+/- 1)

– Internal low-power 37 kHz RC

– Internal multispeed low-power 65 kHz to

4.2 MHz

– PLL for CPU clock and USB (48 MHz)

• Pre-programmed bootloader

– USART supported

• Development support

– Serial wire debug supported

– JTAG and trace supported

• Up to 83 fast I/Os (73 I/Os 5V tolerant), all

mappable on 16 external interrupt vectors

• Memories

– Up to 128 Kbytes Flash memory with ECC

– Up to 32 Kbytes RAM

– Up to 4 Kbytes of true EEPROM with ECC

– 80 byte backup register

• LCD Driver (except STM32L151x6/8/B-A

devices) for up to 8x40 segments

– Support contrast adjustment

– Support blinking mode

– Step-up converter on board

• Rich analog peripherals (down to 1.8 V)

– 12-bit ADC 1 Msps up to 24 channels

– 12-bit DAC 2 channels with output buffers

– 2x Ultra-low-power-comparators

(window mode and wake up capability)

• DMA controller 7x channels

• 8x peripheral communication interfaces

– 1x USB 2.0 (internal 48 MHz PLL)

– 3x USART (ISO 7816, IrDA)

– 2x SPI 16 Mbits/s

– 2x I2C (SMBus/PMBus)

• 10x timers: 6x 16-bit with up to 4 IC/OC/PWM

channels, 2x 16-bit basic timers, 2x watchdog

timers (independent and window)

• Up to 20 capacitive sensing channels

supporting touchkey, linear and rotary touch

sensors

• CRC calculation unit, 96-bit unique ID

Description

The ultra-low-power STM32L151x6/8/B-A and STM32L152x6/8/B-A devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 32 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L151x6/8/B-A and STM32L152x6/8/B-A devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB. The STM32L151x6/8/B-A and STM32L152x6/8/B-A devices offer up to 20 capacitive sensing channels to simply add touch sensing functionality to any application.

They also include a real-time clock with sub-second counting and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller (except STM32L151x6/8/B-A devices) has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

The ultra-low-power STM32L151x6/8/B-A and STM32L152x6/8/B-A devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105°C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.