STM32L151VDT6TR中文资料意法半导体数据手册PDF规格书

特性 Features

• Ultra-low-power platform

– 1.65 V to 3.6 V power supply

– -40°C to 105°C temperature range

– 305 nA Standby mode (3 wakeup pins)

– 1.15 μA Standby mode + RTC

– 0.475 μA Stop mode (16 wakeup lines)

– 1.35 μA Stop mode + RTC

– 11 μA Low-power run mode

– 230 μA/MHz Run mode

– 10 nA ultra-low I/O leakage

– 8 μs wakeup time

• Core: ARM® Cortex®-M3 32-bit CPU

– From 32 kHz up to 32 MHz max

– 33.3 DMIPS peak (Dhrystone 2.1)

– Memory protection unit

• Up to 34 capacitive sensing channels

• CRC calculation unit, 96-bit unique ID

• Reset and supply management

– Low-power, ultrasafe BOR (brownout reset) with 5 selectable thresholds

– Ultra-low-power POR/PDR

– Programmable voltage detector (PVD)

• Clock sources

– 1 to 24 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– High Speed Internal 16 MHz factorytrimmed RC (+/- 1%)

– Internal low-power 37 kHz RC

– Internal multispeed low-power 65 kHz to 4.2 MHz

– PLL for CPU clock and USB (48 MHz)

• Pre-programmed bootloader

– USB and USART supported

• Serial wire debug, JTAG and trace

• Up to 116 fast I/Os (102 I/Os 5V tolerant), all mappable on 16 external interrupt vectors

• Memories

– 384 KB Flash with ECC (with 2 banks of 192 KB enabling Rww capability)

– 48 KB RAM

– 12 KB of true EEPROM with ECC

– 128 byte backup register

– Memory interface controller supporting SRAM, PSRAM and NOR Flash

• LCD driver (except STM32L151xD devices) up to 8x40 segments, contrast adjustment, blinking mode, step-up converter

• Rich analog peripherals (down to 1.8V)

– 3x operational amplifiers

– 12-bit ADC 1 Msps up to 40 channels

– 12-bit DAC 2 ch with output buffers

– 2x ultra-low-power-comparators (window mode and wakeup capability)

• DMA controller 12x channels

• 12x peripheral communication interfaces

– 1x USB 2.0 (internal 48 MHz PLL)

– 5x USARTs

– Up to 8x SPIs (2x I2S, 3x 16 Mbit/s)

– 2x I2Cs (SMBus/PMBus)

– 1x SDIO interface

• 11x timers: 1x 32-bit, 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window)

描述 Description

The ultra-low-power STM32L151xD and STM32L152xD devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 384 Kbytes and RAM up to 48 Kbytes), a flexible static memory controller (FSMC) interface (for devices with packages of 100 pins and more) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The STM32L151xD and STM32L152xD devices offer three operational amplifiers, one 12-bit ADC, two DACs, two ultra-low-power comparators, one general-purpose 32-bit timer, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L151xD and STM32L152xD devices contain standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2S, one SDIO, three USARTs, two UARTs, and an USB. The STM32L151xD and STM32L152xD devices offer up to 34 capacitive sensing channels to simply add a touch sensing functionality to any application.

They also include a real-time clock and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller (except STM32L151xD devices) has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.

The ultra-low-power STM32L151xD and STM32L152xD devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.