STM32L100RC数据手册ST中文资料规格书

描述 Description

The ultra-low-power STM32L100RC device incorporates the connectivity power of the universal serial bus (USB) with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 256 Kbytes and RAM up to 16 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The STM32L100RC device offers one 12-bit ADC, two DACs, two ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L100RC device contains standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2S, three USARTs, and an USB.

It also includes a real-time clock and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.

The ultra-low-power STM32L100RC device operates from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. It is available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.

特性 Features

• Ultra-low-power platform
•1.65 V to 3.6 V power supply
•-40 °C to 105 °C temperature range
•0.29 µA Standby mode (3 wakeup pins)
•1.15 µA Standby mode + RTC
•0.44 µA Stop mode (16 wakeup lines)
•1.4 µA Stop mode + RTC
•8.6 µA Low-power run mode
•185 µA/MHz Run mode
•10 nA ultra-low I/O leakage
•8 µs wakeup time
• Core: ARM® Cortex®-M3 32-bit CPU
•From 32 kHz up to 32 MHz max
•1.25 DMIPS/MHz (Dhrystone 2.1)
•Memory protection unit
• Reset and supply management
•Low-power, ultrasafe BOR (brownout reset) with 5 selectable thresholds
•Ultra-low-power POR/PDR
•Programmable voltage detector (PVD)
• Clock sources
•1 to 24 MHz crystal oscillator
•32 kHz oscillator for RTC with calibration
•High Speed Internal 16 MHz
•Internal low-power 37 kHz RC
•Internal multispeed low-power 65 kHz to 4.2 MHz
•PLL for CPU clock and USB (48 MHz)
• Pre-programmed bootloader
•USB and USART supported
• Development support
•Serial wire debug supported
•JTAG supported
• 51 fast I/Os (42 I/Os 5V tolerant), all mappable on 16 external interrupt vectors
• Memories
•256 Kbytes of Flash memory with ECC
•16 Kbytes of RAM
•4 Kbytes of true EEPROM with ECC
•20-byte backup register
• LCD Driver for up to 8x28 segments
• Analog peripherals
•12-bit ADC 1Msps up to 20 channels
•12-bit DACs 2 channels with output buffers
•2x ultra-low-power-comparators(window mode and wakeup capability)
• DMA controller 12x channels
• 9x peripheral communication interfaces
•1x USB 2.0 (internal 48 MHz PLL)
•3x USARTs
•Up to 8x SPIs (2x I2Ss, 3x 16 Mbits/s)
•2xI2Cs (SMBus/PMBus)
• 10x timers: 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window)
• CRC calculation unit