STM32L100R8-A数据手册ST中文资料规格书

描述 Description

The ultra-low-power STM32L100x6/8/B-A devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 16 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L100x6/8/B-A devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB.

They also include a real-time clock with sub-second counting and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

The ultra-low-power STM32L100x6/8/B-A devices operate from a 1.8 to 3.6 V power supply. They are available in the -40 to +85 °C temperature range. A comprehensive set of power-saving modes allows the design of low-power applications.

特性 Features

• Ultra-low-power platform
•1.8 V to 3.6 V power supply
•-40°C to 85°C temperature range
•0.28 µA Standby mode (2 wakeup pins)
•1.11 µA Standby mode + RTC
•0.44 µA Stop mode (16 wakeup lines)
•1.38 µA Stop mode + RTC
•10.9 µA Low-power Run mode
•185 µA/MHz Run mode
•10 nA ultra-low I/O leakage
•< 8 µs wakeup time
• Core: ARM® Cortex®-M3 32-bit CPU
•From 32 kHz up to 32 MHz max
•1.25 DMIPS/MHz (Dhrystone 2.1)
•Memory protection unit
• Reset and supply management
•Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds
•Ultra-low-power POR/PDR
•Programmable voltage detector (PVD)
• Clock sources
•1 to 24 MHz crystal oscillator
•32 kHz oscillator for RTC with calibration
•High Speed Internal 16 MHz
•Internal low-power 37 kHz RC
•Internal multispeed low-power 65 kHz to 4.2 MHz
•PLL for CPU clock and USB (48 MHz)
• Pre-programmed bootloader
•USART supported
• Development support
•Serial wire debug supported
•JTAG and trace supported
• Up to 51 fast I/Os (42 I/Os 5V tolerant), all mappable on 16 external interrupt vectors
• Memories
•Up to 128 Kbytes of Flash memory with ECC
•Up to 16 Kbytes of RAM
•Up to 2 Kbytes of true EEPROM with ECC
•20-byte backup register
• LCD Driver for up to 8x28 segments
•Support contrast adjustment
•Support blinking mode
•Step-up converter on board
• Rich analog peripherals (down to 1.8 V)
•12-bit ADC 1 Msps up to 24 channels
•12-bit DAC 2 channels with output buffers
•2x ultra-low-power comparators(window mode and wakeup capability)
• DMA controller 7x channels
• 8x peripheral communication interfaces
•1x USB 2.0 (internal 48 MHz PLL)
•3x USART (ISO 7816, IrDA)
•2x SPI 16 Mbit/s
•2x I2C (SMBus/PMBus)
• 10x timers: 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window)
• CRC calculation unit