STM32L010C6T6TR中文资料意法半导体数据手册PDF规格书

特性 Features

• Ultra-low-power platform

– 1.8 V to 3.6 V power supply

– –40 to 85 °C temperature range

– 0.23 μA Standby mode (2 wakeup pins)

– 0.35 μA Stop mode (16 wakeup lines)

– 0.6 μA Stop mode + RTC + 8-Kbyte RAM

retention

– Down to 76 μA/MHz in Run mode

– 5 μs wakeup time (from Flash memory)

– 41 μA 12-bit ADC conversion at 10 ksps

• Core: Arm® 32-bit Cortex®-M0+

– From 32 kHz to 32 MHz

– 0.95 DMIPS/MHz

• Reset and supply management

– Ultra-low-power BOR (brownout reset) with

5 selectable thresholds

– Ultra-low-power POR/PDR

• Clock sources

– 0 to 32 MHz external clock

– 32 kHz oscillator for RTC with calibration

– High-speed internal 16 MHz factory-trimmed RC

(±1)

– Internal low-power 37 kHz RC

– Internal multispeed low-power 65 kHz to

4.2 MHz RC

– PLL for CPU clock

• Pre-programmed bootloader

– USART, SPI supported

• Development support

– Serial wire debug supported

• 38 fast I/Os (31 I/Os 5-Volt tolerant)

• Memories

– 32-Kbyte Flash memory

– 8-Kbyte RAM

– 256 bytes of data EEPROM

– 20-byte backup register

– Sector protection against R/W operation

• Analog peripherals

– 12-bit ADC 1.14 Msps up to 10 channels (down

to 1.8 V)

• 7-channel DMA controller, supporting ADC, SPI,

I2C, USART and timers

• 4x peripherals communication interface

• 1x USART, 1x LPUART (low power)

• 1x SPI 16 Mbit/s

• 1x I2C (SMBus/PMBus)

• 7x timers: 1x 16-bit with up to 4 channels,

1x 16-bit with up to 2 channels, 1x 16-bit ultra-lowpower

timer, 1x SysTick, 1x RTC and 2x watchdogs

(independent/window)

• CRC calculation unit, 96-bit unique ID

• LFQFP48 package is ECOPACK2 compliant

描述 Description

The ultra-low-power STM32L010C6 microcontroller incorporates the high-performance

Arm® Cortex®-M0+ 32-bit RISC core operating at 32 MHz, high-speed embedded memories

(32 Kbytes of Flash program memory, 256 bytes of data EEPROM and 8 Kbytes of RAM)

plus an extensive range of enhanced I/Os and peripherals.

The STM32L010C6 provides high power efficiency over a wide performance range. This is

achieved with a large choice of internal and external clock sources, internal voltage

adaptation, and several low-power modes.

The STM32L010C6 offers several analog features: one 12-bit ADC with hardware

oversampling, several timers, one low-power timer (LPTIM), two general-purpose 16-bit

timers, one RTC and one SysTick that can be used as timebases. The STM32L010C6 also

features two watchdogs, one watchdog with independent clock and window capability, and

one window watchdog based on the bus clock.

Moreover, the STM32L010C6 embeds standard and advanced communication interfaces:

one I2C, one SPI, one USART, and a low-power UART (LPUART).

The STM32L010C6 also includes a real-time clock and a set of backup registers that remain

powered in Standby mode.

The ultra-low-power STM32L010C6 operates from a 1.8 to 3.6 V power supply and in the

–40 to + 85 °C temperature range. A comprehensive set of power-saving modes allows the

design of low-power applications.