STM32G483VEU3中文资料意法半导体数据手册PDF规格书

Features

Includes ST state-of-the-art patented

technology

• Core: Arm® 32-bit Cortex®-M4 CPU with FPU,

Adaptive real-time accelerator (ART

Accelerator) allowing 0-wait-state execution

from Flash memory, frequency up to 170 MHz

with 213 DMIPS, MPU, DSP instructions

• Operating conditions:

– VDD, VDDA voltage range:

1.71 V to 3.6 V

• Mathematical hardware accelerators

– CORDIC for trigonometric functions

acceleration

– FMAC: filter mathematical accelerator

• Memories

– 512 Kbytes of Flash memory with ECC

support, two banks read-while-write,

proprietary code readout protection

(PCROP), securable memory area, 1 Kbyte

OTP

– 96 Kbytes of SRAM, with hardware parity

check implemented on the first 32 Kbytes

– Routine booster: 32 Kbytes of SRAM on

instruction and data bus, with hardware

parity check (CCM SRAM)

– External memory interface for static

memories FSMC supporting SRAM,

PSRAM, NOR and NAND memories

– Quad-SPI memory interface

• Reset and supply management

– Power-on/power-down reset

(POR/PDR/BOR)

– Programmable voltage detector (PVD)

– Low-power modes: sleep, stop, standby

and shutdown

– VBAT supply for RTC and backup registers

• Clock management

– 4 to 48 MHz crystal oscillator

– 32 kHz oscillator with calibration

– Internal 16 MHz RC with PLL option (± 1)

– Internal 32 kHz RC oscillator (± 5)

• Up to 107 fast I/Os

– All mappable on external interrupt vectors

– Several I/Os with 5 V tolerant capability

• Interconnect matrix

• 16-channel DMA controller

• 5 x 12-bit ADCs 0.25 μs, up to 42 channels.

Resolution up to 16-bit with hardware

oversampling, 0 to 3.6 V conversion range

• 7 x 12-bit DAC channels

– 3 x buffered external channels 1 MSPS

– 4 x unbuffered internal channels 15 MSPS

• 7 x ultra-fast rail-to-rail analog comparators

• 6 x operational amplifiers that can be used in

PGA mode, all terminals accessible

• Internal voltage reference buffer (VREFBUF)

supporting three output voltages (2.048 V,

2.5 V, 2.9 V)

• 17 timers:

– 2 x 32-bit timer and 2 x 16-bit timers with

up to four IC/OC/PWM or pulse counter

and quadrature (incremental) encoder input

– 3 x 16-bit 8-channel advanced motor

control timers, with up to 8 x PWM

channels, dead time generation and

emergency stop

– 1 x 16-bit timer with 2 x IC/OCs, one

OCN/PWM, dead time generation and

emergency stop

– 2 x 16-bit timers with IC/OC/OCN/PWM,

dead time generation and emergency stop

– 2 x watchdog timers (independent, window)

– 1 x SysTick timer: 24-bit downcounter

– 2 x 16-bit basic timers

– 1 x low-power timer

• Calendar RTC with alarm, periodic wakeup

from stop/standby

• Communication interfaces

– 3 x FDCAN controller supporting flexible

data rate

– 4 x I2C Fast mode plus (1 Mbit/s) with

20 mA current sink, SMBus/PMBus,

wakeup from stop

– 5 x USART/UARTs (ISO 7816 interface,

LIN, IrDA, modem control)

– 1 x LPUART

– 4 x SPIs, 4 to 16 programmable bit frames,

2 x with multiplexed half duplex I2S

interface

– 1 x SAI (serial audio interface)

– USB 2.0 full-speed interface with LPM and

BCD support

– IRTIM (infrared interface)

– USB Type-C™ /USB power delivery

controller (UCPD)

• True random number generator (RNG)

• CRC calculation unit, 96-bit unique ID

• AES: 128/256-bit key encryption hardware

accelerator

• Development support: serial wire debug

(SWD), JTAG, Embedded Trace Macrocell™

Description

The STM32G483xE devices are based on the high-performance Arm® Cortex®-M4 32-bit

RISC core. They operate at a frequency of up to 170 MHz.

The Cortex-M4 core features a single-precision floating-point unit (FPU), which supports all

the Arm single-precision data-processing instructions and all the data types. It also

implements a full set of DSP (digital signal processing) instructions and a memory protection

unit (MPU) which enhances the application’s security.

These devices embed high-speed memories (up to 512 Kbytes of Flash memory, and

128 Kbytes of SRAM), a flexible external memory controller (FSMC) for static memories (for

devices with packages of 100 pins and more), a Quad-SPI Flash memory interface, and an

extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB

buses and a 32-bit multi-AHB bus matrix.

The devices also embed several protection mechanisms for embedded Flash memory and

SRAM: readout protection, write protection, securable memory area and proprietary code

readout protection.

The devices embed peripherals allowing mathematical/arithmetic function acceleration

(CORDIC for trigonometric functions and FMAC unit for filter functions).

They offer five fast 12-bit ADCs (4 Msps), seven comparators, six operational amplifiers,

seven DAC channels (3 external and 4 internal), an internal voltage reference buffer, a lowpower

RTC, two general-purpose 32-bit timers, three 16-bit PWM timers dedicated to motor

control, seven general-purpose 16-bit timers, and one 16-bit low-power timer.

They also feature standard and advanced communication interfaces such as:

- Four I2Cs

- Four SPIs multiplexed with two half duplex I2Ss

- Three USARTs, two UARTs and one low-power UART.

- Three FDCANs

- One SAI

- USB device

- UCPD

The STM32G483xE devices embed an AES.

The devices operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C

junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of

power-saving modes allows the design of low-power applications.

Some independent power supplies are supported including an analog independent supply

input for ADC, DAC, OPAMPs and comparators. A VBAT input allows backup of the RTC and

the registers.

The STM32G483xE family offers 8 packages from 48-pin to 128-pin.