STM32F334K6数据手册ST中文资料规格书

描述 Description

The STM32F334x4/6/8 family incorporates the high-performance Arm® Cortex®-M4 32-bit RISC core operating at up to 72 MHz frequency embedding a floating point unit (FPU), high-speed embedded memories (up to 64 Kbytes of Flash memory, up to 12 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The STM32F334x4/6/8 microcontrollers offer two fast 12-bit ADCs (5 Msps), up to three ultra-fast comparators, an operational amplifier, three DAC channels, a low-power RTC, one high-resolution timer, one general-purpose 32-bit timer, one timer dedicated to motor control, and four general-purpose 16-bit timers. They also feature standard and advanced communication interfaces: one I2C, one SPI, up to three USARTs and one CAN.

The STM32F334x4/6/8 family operates in the –40 to +85 °C and –40 to +105 °C temperature ranges from 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allow the design of low-power applications.

The STM32F334x4/6/8 family offers devices in 32, 48 and 64-pin packages.

Depending on the device chosen, different sets of peripherals are included.

特性 Features

• Core: Arm® Cortex®-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division DSP instruction
• Memories
•Up to 64 Kbytes of Flash memory
•Up to 12 Kbytes of SRAM with HW parity check
•Routine booster: 4 Kbytes of SRAM on instruction and data bus with HW parity check (CCM)
• CRC calculation unit
• Reset and supply management
•Low-power modes: Sleep, Stop, Standby
•VDD,VDDA voltage range: 2.0 to 3.6 V
•Power-on/Power-down reset (POR/PDR)
•Programmable voltage detector (PVD)
•VBAT supply for RTC and backup registers
• Clock management
•4 to 32 MHz crystal oscillator
•32 kHz oscillator for RTC with calibration
•Internal 8 MHz RC (up to 64 MHz with PLL option)
•Internal 40 kHz oscillator
• Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant
• Interconnect matrix
• 7-channel DMA controller
• Up to two ADC 0.20 μs (up to 21 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single-ended / differential mode, separate analog supply from 2.0 to 3.6 V
• Temperature sensor
• Up to three 12-bit DAC channels with analog supply from 2.4 V to 3.6 V
• Three ultra-fast rail-to-rail analog comparators with analog supply from 2 to 3.6 V
• One operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V
• Up to 18 capacitive sensing channels supporting touchkeys, linear and rotary touch sensors
• Up to 12 timers
•HRTIM: 6 x16-bit counters, 217 ps resolution, 10 PWM, 5 fault inputs, 10 ext event input, 1 synchro. input,1 synchro. out
•One 32-bit timer and one 16-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
•One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop
•One 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime generation, emergency stop
•Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop
•Two watchdog timers (independent, window)
•SysTick timer: 24-bit downcounter
•Up to two 16-bit basic timers to drive DAC
• Calendar RTC with alarm, periodic wakeup from Stop
• Communication interfaces
•CAN interface (2.0 B Active) and one SPI
•One I2C with 20 mA current sink to support Fast mode plus, SMBus/PMBus
•Up to 3 USARTs, one with ISO/IEC 7816 interface, LIN, IrDA, modem control
• Debug mode: serial wire debug (SWD), JTAG
• 96-bit unique ID
• All packages ECOPACK®2 compliant