STM32F302RC数据手册ST中文资料规格书

描述 Description

The STM32F302xB/STM32F302xC family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core with FPU operating at a frequency of up to 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (up to 256 Kbytes of Flash memory, up to 40 Kbytes of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The devices offer up to two fast 12-bit ADCs (5 Msps), four comparators, two operational amplifiers, up to one DAC channel, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer, and one timer dedicated to motor control. They also feature standard and advanced communication interfaces: up to two I2Cs, up to three SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.

The STM32F302xB/STM32F302xC family operates in the -40 to +85 °C and -40 to +105 °C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F302xB/STM32F302xC family offers devices in three packages ranging from 48 pins to 100 pins.

The set of included peripherals changes with the device chosen.

特性 Features

• Core: ARM®Cortex®-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction and MPU (memory protection unit)
• Operating conditions:
•VDD, VDDAvoltage range: 2.0 V to 3.6 V
• Memories
•128 to 256 Kbytes of Flash memory
•Up to 40 Kbytes of SRAM, with HW parity check implemented on the first 16 Kbytes.
• CRC calculation unit
• Reset and supply management
•Power-on/Power-down reset (POR/PDR)
•Programmable voltage detector (PVD)
•Low-power modes: Sleep, Stop and Standby
•VBATsupply for RTC and backup registers
• Clock management
•4 to 32 MHz crystal oscillator
•32 kHz oscillator for RTC with calibration
•Internal 8 MHz RC with x 16 PLL option
•Internal 40 kHz oscillator
• Up to 87 fast I/Os
•All mappable on external interrupt vectors
•Several 5 V-tolerant
• Interconnect matrix
• 12-channel DMA controller
• Two ADCs 0.20 μS (up to 17 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential input, separate analog supply from 2 to 3.6 V
• One 12-bit DAC channel with analog supply from 2.4 to 3.6 V
• Four fast rail-to-rail analog comparators with analog supply from 2 to 3.6 V
• Two operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V
• Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
• Up to 11 timers
•One 32-bit timer and two 16-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
•One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop
•One 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime generation and emergency stop
•Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop
•Two watchdog timers (independent, window)
•SysTick timer: 24-bit downcounter
•One 16-bit basic timer to drive the DAC
• Calendar RTC with Alarm, periodic wakeup from Stop/Standby
• Communication interfaces
•CAN interface (2.0B Active)
•Two I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from STOP
•Up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control)
•Up to three SPIs, two with multiplexed half/full duplex I2S interface, 4 to 16 programmable bit frames
•USB 2.0 full speed interface
•Infrared transmitter
• Serial wire debug, Cortex®-M4 with FPU ETM, JTAG
• 96-bit unique ID