STM32F101VG数据手册ST中文资料规格书

描述 Description

The STM32F101xF and STM32F101xG access line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 1 Mbyte and SRAM of 80 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, ten general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.

The STM32F101xx XL-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

These features make the STM32F101xx XL-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems , power meters, and video intercom.

特性 Features

• Core: ARM®32-bit Cortex®-M3 CPU with MPU
•36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance
•Single-cycle multiplication and hardware division
• Memories
•768 Kbytes to 1 Mbyte of Flash memory (dual bank with read-while-write capability)
•80 Kbytes of SRAM
•Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
•LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management
•2.0 to 3.6 V application supply and I/Os
•POR, PDR, and programmable voltage detector (PVD)
•4-to-16 MHz crystal oscillator
•Internal 8 MHz factory-trimmed RC
•Internal 40 kHz RC with calibration capability
•32 kHz oscillator for RTC with calibration
• Low power
•Sleep, Stop and Standby modes
•VBATsupply for RTC and backup registers
• 1 x 12-bit, 1 μs A/D converters (up to 16 channels)
•Conversion range: 0 to 3.6 V
•Temperature sensor
• 2 × 12-bit D/A converters
• DMA
•12-channel DMA controller
•Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs
• Up to 112 fast I/O ports
•51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
• Debug mode
•Serial wire debug (SWD) & JTAG interfaces
•Cortex-M3 Embedded Trace Macrocell™
• Up to 15 timers
•Up to ten 16-bit timers, with up to 4 IC/OC/PWM or pulse counters
•2 × watchdog timers (Independent and Window)
•SysTick timer: a 24-bit downcounter
•2 × 16-bit basic timers to drive the DAC
• Up to 10 communication interfaces
•Up to 2 x I2C interfaces (SM7816 interface, LIN, IrDA capability, modem control)
•Up to 3 SPIs (18 Mbit/s)
• CRC calculation unit, 96-bit unique ID
• ECOPACK®packages