STM1810数据手册集成电路（IC）的监控器规格书PDF

描述 Description

STM181x devices are low power reset devices used to monitor power supplies for microcontrollers. They perform a single function: asserting a reset signal whenever VCCsupply voltage drops below a preset value and keeping it asserted until VCChas risen above the preset threshold for a minimum period of time (trec). They provide excellent circuit reliability without additional external components when used with +3.0 V / +3.3 V (STM1815–STM1818), and +5 V (STM1810–STM1813) power supply systems.
A precision voltage reference and comparator monitors the VCCinput for an out-of-tolerance condition. When an invalid VCCcondition occurs, the reset output (RST) is forced low (or high in the case of RST) and remains asserted for trecafter VCCrises above the reset threshold. The STM1813/1818 also keep reset asserted for trecafter the output is momentarily pulled to ground by an external push-button switch.
The STM1812 and STM1817 have an active-high, push-pull output. The STM1810 and STM1815 (push-pull) and STM1811, STM1813, STM1816, and STM1818 (open-drain) have an active-low RSToutput. The open-drain devices (STM1811 / STM1813 / STM1816 / STM1818) also have an internal pull-up resistor to VCC. The STM1813 and STM1818 feature a debounced manual reset feature that asserts a reset if the RSTpin is pulled low for more than 1.5 μs. When used to initiate manual reset, RSTdebounces signals from devices such as mechanical switches. For devices with this feature, the release of the external switch triggers the reset period.
The STM181x devices are guaranteed to output the correct logic state for VCCdown to 1.0 V (0 °C to +105 °C). They also provide a reset comparator designed to ignore fast transients on VCC.
Reset thresholds are available between +2.55 V and +4.62 V. These small, low power devices are ideal for use in portable equipment. All are available in the space-saving 3-pin SOT23 package, and are specified from –40 °C to +105 °C.

特性 Features

• Precision monitoring of 3 V, 3.3 V, and 5 V supply voltages
• Four output configurations:
• Push-pull, active-high (STM1812,1817)
• Push-pull, active-low (STM1810,1815)
• Open-drain, active-low (STM1811,1816)
• Open-drain, active-low with push-buttondetect (STM1813,1818)
• Reset pulse width - 100 ms (min.)
• Low supply current - 4 μA (typ.)
• Guaranteed assertion down to VCC= 1.0 V (0 °C to 105 °C)
• Factory-trimmed reset thresholds of 2.55 V, 2.88 V, 3.06 V, 4.37 V, and 4.62 V (typ.)
• Power supply transient immunity
• Push-button/manual reset detect (STM1813/1818)
• Operating temperature: –40 °C to 105 °C
• ± 2.5% reset threshold accuracy:(–40 °C to 105 °C)
• Available in the SOT23-3 package
• Fully compatible with DS181x and MXD181x products.

简介

STM1810属于集成电路（IC）的监控器。由制造生产的STM1810监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。