Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 3.0A)

Overview The STK672-050 is a unipolar constant-current chopper-type externally-excited 4-phase stepping motor driver hybrid IC which uses MOSFET power devices. It has a microstep operation-supported 4-phase distributed controller built-in to realize a high torque, low vibration, low noise steppin

文件：218.8 Kbytes 页数：11 Pages

SANYO

三洋

Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 3.0A)

ONSEMI

安森美半导体

Unipolar Fixed-Current Chopper(separate excitation)Type 1.7A Output Current Stepping Motor Driver with Built-in 4-Phase Distribution Controller

Overview The STK672-010 is a 4-phase stepping motor driver IC that adopts power MOSFET for its output stage and that uses a unipolar fixed-current chopper scheme. Since the STK672-010 includes a built-in 4-phase distribution controller, the stepping motor driver circuit and the control scheme c

文件：367.11 Kbytes 页数：17 Pages

SANYO

三洋

Unipolar Fixed-Current Chopper(separate excitation)Type 3.0A Output Current Stepping Motor Driver with Built-in 4-Phase Distribution Controller?

Overview The STK672-020 is a 4-phase stepping motor driver IC that adopts power MOSFET for its output stage and that uses a unipolar fixed-current chopper scheme. Since the STK672-020 includes a built-in 4-phase distribution controller, the stepping motor driver circuit and the control scheme can

文件：365.71 Kbytes 页数：17 Pages

SANYO

三洋

Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 3.0A)

Overview The STK672-050 is a unipolar constant-current chopper-type externally-excited 4-phase stepping motor driver hybrid IC which uses MOSFET power devices. It has a microstep operation-supported 4-phase distributed controller built-in to realize a high torque, low vibration, low noise steppin

文件：218.8 Kbytes 页数：11 Pages

SANYO

三洋

Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A)

Overview The STK672-040 is a unipolar constant-current choppertype externally-excited 4-phase stepping motor driver hybrid IC which uses MOSFET power devices. It has a microstep operation-supported 4-phase distributed controller built-in to realize a high torque, low vibration, low noise stepping

文件：1.06048 Mbytes 页数：11 Pages

SANYO

三洋

Thick-Film Hybrid IC Unipolar Constant-current Chopper (external excitation PWM) Circuit with Built-in Microstepping Controller Stepping Motor Driver (sine wave drive) Output Current 1.5A (no heat sink*)

Overview The STK672-040-E is a stepping motor driver hybrid IC that uses power MOSFETs in the output stage. It includes a builtin microstepping controller and is based on a unipolar constant-current PWM system. The STK672-040-E supports application simplification and standardization by providing

文件：208.14 Kbytes 页数：19 Pages

SANYO

三洋

Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A)

Overview The STK672-040 is a unipolar constant-current choppertype externally-excited 4-phase stepping motor driver hybrid IC which uses MOSFET power devices. It has a microstep operation-supported 4-phase distributed controller built-in to realize a high torque, low vibration, low noise stepping

文件：1.06048 Mbytes 页数：11 Pages

SANYO

三洋

Stepping Motor Driver (sine wave drive) Output Current 3.0A (no heat sink*)

Thick-Film Hybrid IC Unipolar Constant-current Chopper (external excitation PWM) Circuit with Built-in Microstepping Controller Stepping Motor Driver (sine wave drive) Output Current 3.0A (no heat sink*) Overview The STK672-050-E is a stepping motor driver hybrid IC that uses p

文件：206.04 Kbytes 页数：19 Pages

SANYO

三洋

Thick-Film Hybrid IC

STK672 Series Evaluation Board Users Manual Thick−Film Hybrid IC Unipolar Constant−current Chopper (external Excitation PWM) Circuit with Built−in Microstepping Controller Stepping Motor Driver (sine wave drive) This Evaluation Board User’s Manual describes the set-up and use of the STK672 Serie

文件：204.81 Kbytes 页数：19 Pages

ONSEMI

安森美半导体