STK531U394C-E中文资料智能功率模块 (IPM)，600V，15A数据手册ONSEMI规格书

描述 Description

This “Inverter IPM” is highly integrated power module containing all High Voltage (HV) control from HV-DC to 3-phase outputs in a single SIP module (Single-In line Package). Output stage uses IGBT / FRD technology and implements Under Voltage Protection (UVP) and Over Current Protection (OCP) with a Fault Detection output flag. Internal Boost diodes are provided for high side gate boost drive.

特性 Features

• Protective circuits including over current (bus line) and pre-drive low voltage protection are built in.
• Fast speed protection is possible (Self protection)
• Direct input of CMOS level control signals without insulating circuits is possible. (Active HIGH)
• No need photo-coupler design
• A single power supply drive is enabled through the use of bootstrap circuits for upper power supplies. (externally set)
• No need bootstrap diode and resistor at externally
• Built-in simultaneous upper/lower ON prevention circuit to prevent arm shorting through simultaneous ON input for the upper and lower side transistors.(Dead time is required for preventing shorting due to switching delay.)
• All IGBT Gate shutdown at abnormal for safety
• The level of the overcurrent protection current can be changed with the external resistor “RSD” between the “ISD” and “VSS” terminals.
• Can be customized by each application
• Monitoring substrate temperature is possible through the use of an internal thermistor.
• High precision monitor is possible
• Certification : UL Recognized (File number : E339285)

应用 Application

• 3-phase Motor
• Motor Control System
• Industrial / General Control System
• HVAC
• Clothes Washer / Dryer
• Dish Washer
• Refrigerator

简介

STK531U394C-E属于分立半导体产品的功率驱动器模块。由ONSEMI制造生产的STK531U394C-E功率驱动器模块功率驱动器模块为电源组件（通常为半桥或单相、两相或三相配置的 IGBT 和 MOSFET）提供物理防护。功率半导体或裸片将焊接或烧结在基材上，后者可承载功率半导体并在需要时提供电和热触点以及电绝缘。功率模块提供更高的功率密度，并且在许多情况下更可靠且更易于冷却。