STEVAL-ISA206V1开发板套件编程器的评估板-DC/DC与AC/DC（离线）SMPS规格书PDF中文资料

STEVAL-ISA206V1属于开发板套件编程器的评估板-DC/DC与AC/DC（离线）SMPS。由意法半导体集团制造生产的STEVAL-ISA206V1评估板 - DC/DC 与 AC/DC（离线）SMPS该系列产品提供了一种方便的方法，可对开关模式电源转换所用的器件（包括 DC-DC 和 AC-DC 型）进行性能或特性评估。“稳压器”（包含内部电源开关装置）和“控制器”（设计为控制外部电源开关）之类的器件均包括在内。

特性 Features

• 2 A DC output current

• 4 V to 38 V operating input voltage.

• Low consumption mode or low noise mode

• Programmable ISKIP current

• 30 μA IQ at light load (LCM VIN = 12 V and VOUT = 3.3 V)

• 8 μA IQ-SHTDWN

• Adjustable fSW (250 kHz - 2 MHz)

• Output voltage adjustable from 0.85 V to VIN

• Embedded output voltage supervisor

• Synchronization (in all fSW range)

• Adjustable soft-start time

• Internal current limiting

• Overvoltage protection

• Output voltage sequencing

• Peak current mode architecture

• RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ

• Thermal shutdown

• RoHS and WEEE compliant

描述 Description

The STEVAL-ISA206V1 product evaluation board is based on the L6986H

synchronous step-down switching regulator that can deliver up to 2 A and withstand

cold cranking across 100 duty cycle, which, along with its wide input operating

voltage range, render the L6986H the ideal choice for 12 V - 24 V industrial standard

Bus.

Synchronous rectification helps to achieve higher efficiency at full load as well as

application compactness, while high-frequency switching (programmable up to 2

MHz) helps to cut on power passive costs and size while staying outside of the AM

band.

The device can operate in a low consumption mode (LCM) with a quiescent current

down to 30 μA at VIN = 12 V and VOUT = 3.3 V, hence assuring high efficiency at light

loads, as required by typical car body applications that active during car parking.

A low noise mode (LNM) is also available to meet the requirements of infotainment

applications of forced PWM mode in all loading conditions.

The default configuration of the board is output voltage set to 3.3 V configured in

LCM, 500 kHz switching frequency, ISKIP current set to high level and the switchover

feature disabled. All of these configurations can be easily changed by the user to

evaluate different application scenarios.