STEVAL-ISA126V1开发板套件编程器的评估板-DC/DC与AC/DC（离线）SMPS规格书PDF中文资料

STEVAL-ISA126V1属于开发板套件编程器的评估板-DC/DC与AC/DC（离线）SMPS。由意法半导体集团制造生产的STEVAL-ISA126V1评估板 - DC/DC 与 AC/DC（离线）SMPS该系列产品提供了一种方便的方法，可对开关模式电源转换所用的器件（包括 DC-DC 和 AC-DC 型）进行性能或特性评估。“稳压器”（包含内部电源开关装置）和“控制器”（设计为控制外部电源开关）之类的器件均包括在内。

描述 Description

This document describes a 5 V-2 A application

with 3.3 A peak current capability for 1.9 sec,

using VIPer28H, a new off-line high voltage

converter from STMicroelectronics.

In some applications an SMPS, normally

supposed to deliver a certain amount of power,

from time to time undergoes load peaks that can

be even two or more times as much, but only for

a time interval which is short if compared to the

thermal time constants of the power components.

Typical examples of such loads are printers and

audio systems.

In these cases, it is more cost-effective to

thermally design the system for the maximum

continuous power and not for the peak power

demand, which will be sustained only for a limited

time window.

Such a design is possible thanks to the EPT

function of VIPER28H, which allows the designer

to fix the maximum time window during which the

converter is able to manage the peak power still

maintaining output voltage regulation. If the

overload lasts more than this time window, the

converter is automatically shut down in autorestart mode, in order to avoid the damaging of

the power components.

特性 Features

• Input Voltage range: 90 VRMS to 265 VRMS

• Output Voltage: 5 V

• Max Output Current: IOUTmax 2 A

• Peak Output Current: IOUTpk 3 A

• Precision of output regulation: ΔVOUT_LF ±5

• High Frequency output Voltage ripple:

ΔVOUT_HF 50 mV

• Max ambient operating temperature: TA 60

ºC

• 800 V avalanche rugged power section

• PWM operation , at 115 kHz with frequency

jittering for lower EMI

• Limiting current with adjustable set point

• On-board soft-start

• Safe auto-restart after a fault condition, low

stand-by power (< 50 mW at 265 Vac)

• Adjustable and accurate over voltage

protection, thermal shutdown with

hysteresis, delayed overload protection

• RoHS compliant