STEVAL-IOD003V1中文资料IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo数据手册ST规格书

描述 Description

The STEVAL-IOD003V1 evaluation board is based on the L6362A IO-Link PHY device with full integrated EMC protection (according to IO-Link v1.1 specification) and surge protection (according to IEC 60947-5-2). It provides an affordable and easy-to-use solution for the development of IO-Link and SIO applications, letting you easily evaluate the communication features and robustness of the L6362A.The on-board linear regulators (12 mA-3.3 V from L6362A and 100 mA-12 V from L78L12ABUTR) can be used to supply the microcontroller via the 24 V bus, instead of via USB.When the L78L12ABUTR is enabled (default configuration), you can also perform evaluation of complete industrial sensor modules by connecting the STEVAL-IOD003V1 to a NUCLEO-L073RZ (or NUCLEO-L053R8) board and an X-NUCLEO-IKS01A2 expansion board. The STEVAL-IOD003V1 interfaces with the STM32 controller via UART and GPIO pins and is compatible with the Arduino UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors.

特性 Features

L6362A IO-Link device transceiver main characteristics:IO-Link PHY layer
Dedicated overload diagnostics pin
UART interface
Selectable 12 mA 3.3 V or 10 mA 5.0 V linear regulator
Overload and overheating protections with non-dissipative cut-off function
Full reverse polarity on IO-Link interface pins
EMC protections (as per IO-Link v1.1)
Surge protection (as per IEC 60947-5-2)
DFN-12L (3x3x0.9 mm) package

6.5 to 35 V operating voltage range
On-board 100 mA 12 V linear regulator (L78L)
LEDs for status and diagnostics
Ground and VCC wire break protections
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connectors
RoHS and China RoHS compliant

简介

STEVAL-IOD003V1属于开发板套件编程器的评估板-扩展板子卡。由制造生产的STEVAL-IOD003V1评估板 - 扩展板，子卡评估和扩展板及子卡用于向微控制器平台添加功能，它们可以堆叠到现有针座或预配置的附件端口上。常见功能类型包括放大器、雾化器、音频、时钟定时、接口连接性、数据获取/记录、显示、人机界面、存储器、电机驱动器、光电器件、电源管理、原型设计、继电器和晶体管、RF 和传感器阵列。