STEVAL-IOD003V1开发板套件编程器的评估板-扩展板子卡规格书PDF中文资料

STEVAL-IOD003V1属于开发板套件编程器的评估板-扩展板子卡。由意法半导体集团制造生产的STEVAL-IOD003V1评估板 - 扩展板，子卡评估和扩展板及子卡用于向微控制器平台添加功能，它们可以堆叠到现有针座或预配置的附件端口上。常见功能类型包括放大器、雾化器、音频、时钟定时、接口连接性、数据获取/记录、显示、人机界面、存储器、电机驱动器、光电器件、电源管理、原型设计、继电器和晶体管、RF 和传感器阵列。

特性 Features

• L6362A IO-Link device transceiver main characteristics:

– IO-Link PHY layer

– Dedicated overload diagnostics pin

– UART interface

– Selectable 12 mA 3.3 V or 10 mA 5.0 V linear regulator

– Overload and overheating protections with non-dissipative cut-off function

– Full reverse polarity on IO-Link interface pins

– EMC protections (as per IO-Link v1.1)

– Surge protection (as per IEC 60947-5-2)

– DFN-12L (3x3x0.9 mm) package

• 6.5 to 35 V operating voltage range

• On-board 100 mA 12 V linear regulator (L78L)

• LEDs for status and diagnostics

• Ground and VCC wire break protections

• Compatible with STM32 Nucleo boards

• Equipped with Arduino UNO R3 connectors

• RoHS and China RoHS compliant

描述 Description

The STEVAL-IOD003V1 evaluation board is based on the L6362A IO-Link PHY device with full integrated EMC protection (according to IO-Link v1.1 specification) and surge protection (according to IEC 60947-5-2). It provides an affordable and easy-to-use solution for the development of IO-Link and SIO applications, letting you easily evaluate the communication features and robustness of the L6362A.

The on-board linear regulators (12 mA-3.3 V from L6362A and 100 mA-12 V from L78L12ABUTR) can be used to supply the microcontroller via the 24 V bus, instead of via USB.

When the L78L12ABUTR is enabled (default configuration), you can also perform evaluation of complete industrial sensor modules by connecting the STEVALIOD003V1 to a NUCLEO-L073RZ (or NUCLEO-L053R8) board and an X-NUCLEOIKS01A2 expansion board.

The STEVAL-IOD003V1 interfaces with the STM32 controller via UART and GPIO pins and is compatible with the Arduino UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors.