STA333W中文资料2通道高效数字音频系统数据手册ST规格书

描述 Description

The STA333W is an integrated circuit comprising digital audio processing, digital amplifier control and DDX®power output stage to create a high-power, single-chip DDX®solution for all-digital amplification with high quality and high efficiency.

The STA333W power section consists of four independent half-bridges stages. These can be configured via digital control to operate in different modes. 2 channels can be provided by two full bridges, providing up to 20 W + 20 W of power.

Also provided in the STA333W are new advanced AM radio interference reduction modes. The serial audio data input interface accepts all possible formats, including the popular I2S format. Three channels of DDX®processing are provided.

The STA333W is part of the Sound Terminal™ family that provides full digital audio streaming to the speaker offering cost effectiveness, low power dissipation and sound enrichment.

特性 Features

• Wide supply-voltage range (4.5 V - 20 V)
• 2 power output configurations
•2 channels of binary PWM (stereo mode)
•2 channels of ternary PWM (stereo mode)
• PowerSSO-36 with exposed pad down
• 2 channels of 24-bit DDX®
• 100-dB SNR and dynamic range
• Selectable 32- to 192-kHz input sample rates
• I2C control with selectable device address
• Digital gain -80 dB to +48 dB in 0.5-dB steps
• Software volume update
• Individual channel and master gain/attenuation
• Individual channel and master software and hardware mute
• Independent channel volume bypass
• Automatic zero-detect mute
• Automatic invalid input detect mute
• 2-channel I2S input data Interface
• Selectable clock input ratio
• Input channel mapping
• Automatic volume control for limiting maximum power
• 96-kHz internal processing sample rate, 24-bit precision
• Advanced AM interference frequency switching and noise suppression modes
• Thermal-overload and short-circuit protection embedded
• Video application: 576 * fSinput mode support

简介

STA333W属于集成电路（IC）的音频专用。由制造生产的STA333W音频专用音频专用的半导体器件专为音频信号的滤波、驱动、放大、转换和接口而设计。特征包括功能、应用、通道数、接口、电压和规格。应用包括音频系统、汽车音频、消费类音频、乐器、专业音频、通信系统、电信系统、数字音频、驱动器、前置放大器、信号混合、信号处理、语音触发器解决方案和 10 Base-T。