ST7538Q数据手册集成电路（IC）的驱动器接收器收发器规格书PDF

描述 Description

The ST7538Q is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications. It operates from a single supply voltage and integrates a line driver and two linear regulators for 5V and 3.3V. The device operation is controlled by means of an internal register, programmable through the synchronous serial interface. Additional functions as watchdog, clock output, output voltage and current control, preamble detection, time-out, band in use are included. Realized in Multipower BCD5 technology that allows to integrate DMOS, Bipolar and CMOS structures in the same chip.

特性 Features

• Programmable baud rate up to 4800BPS
• ST7537 compatible
• 8 programmable transmission frequencies
• UART/SPI host interface
• Suitable to application in accordance with EN 50065 CENELEC specifications
• Receiving sensitivity up to 250µVrms
• Band in use detection
• Carrier or preamble detection
• Mains zero crossing detection and synchronization
• Programmable 24 or 48 bit register with security checksum
• Watchdog timer
• Integrated 3.3V voltage regulator (up to 50mA) with short circuit protection
• Integrated 5V voltage regulator (up to 50mA) with short circuit protection
• Half duplex frequency shift keying (FSK) transceiver
• Programmable interface:SynchronousAsynchronous
• Integrated power line driver with programmable voltage and current control
• Very low power consumption (Iq = 5mA)
• 3.3V or 5V digital supply
• 8 or 16 bit header recognition
• Single supply voltage (from 7.5 up to 12.5V)
• Output voltage freeze

简介

ST7538Q属于集成电路（IC）的驱动器接收器收发器。由制造生产的ST7538Q驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。