ST54F中文资料SIP (ST21NFCD controller & ST33G1M2 Secure Element)数据手册ST规格书

描述 Description

The ST54F is an all-in-one solution including ST21NFCD NFC controller and ST33G1M2 or ST33I1M2 Secure Element with the highest security level (EAL6+ and EMVCo certified hardware).
Fully manufactured in a secure environment, the ST33 provides the highest performance levels thanks to its ARM® SC300® core.
The 64-ball WFBGA (4 x 4 x 0.8 mm) ECOPACK® package provides a reduced footprint and pin-to-pin compatibility with the STMicroelectronics NFC standalone solution. There is no internal direct connection between the two devices inside the package.
A complete range of memory sizes up to 2048 Kbyte (depending on profile) of non-volatile Flash memory is available on the Secure Element.
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

特性 Features

SIP (system-in-package) with ST21NFCD controller and ST33G1M2 or ST33I1M2 32-bit secure microcontroller for eUICC / eSE applications
NFC controllerARM® Cortex®-M3 microcontroller
eFlash for full firmware update
Enhanced Active load modulation technology
Enhanced TX drive up to 1.3 W
Compatible with extremely small or metal frame antennas
Optimized power consumption modes
Battery voltage monitoring
System clockFracN PLL input range from 13 to 76.8 MHz
27.12 MHz external crystal oscillator

Automatic Wake-Up via communication interfaces, internal timers, GPIO, RF field or tag detection
Support of an external DC/DC converter for TX supply

RF communicationsActive and passive Peer-to-PeerISO/IEC 18092 - NFCIP-1 Initiator & Target

Passive mode – Reader/WriterNFC Forum Type 1/2/3/4/5 tags
ISO/IEC 15693
MIFARE® Classic12
Thinfilm (ex Kovio) Barcode

Active mode – Card EmulationISO/IEC 14443 Type A & B
JIS X 6319 – 4
MIFARE® Classic(a)(b) through SWP-CLT


External communication interfacesTwo SWP master interfaces up to 1.695 Mbit/s
I2C slave interface up to 3.4 MHz
Slave and master SPI interface up to 13 MHz
HSUART interface up to 6 Mbit/s

Secure microcontrollerARM® SecurCore® SC300™ 32-bit RISC core
1280 Kbytes of Flash memory available
30 Kbytes of RAM
ISO/IEC 7816-3 interface for T=0 and T=1 protocols (master/slave mode)
Single wire protocol (SWP) Interface for communications with NFC router
SPI master/slave interface

Secure operating systemSupports state of the art Secure Element operating systems:
JavaCard™ 3.0.4 Classical Edition
GlobalPlatform™ 2.2.1 with Amendments A,C,D and E
EMVCo™ certification

Electrical characteristicsBattery voltage support from 2.4 V to 5 V
I/O dedicated voltage level (VPS_IO) from 1.62 V to 3.3 V
Supports Class B and C operating conditions for UICC
Ambient operating temperature -25 to + 85 °C

应用Mobile devices
Wearable devices
SmartWatch
Secure Connected Devices