ST54D中文资料SIP (ST21NFCB controller & ST33G1M2 Secure element)数据手册ST规格书

描述 Description

The ST54D is an all-in-one solution including NFC controller and Secure Element with the highest security level (EAL5+ and EMVCo certified hardware).
Fully manufactured in a secure environment, it provides the highest performance levels thanks to its ARM® SC300® core.
The 64-ball WFBGA (4 x 4 x 0.8 mm) ECOPACK® package provides a reduced footprint and pin-to-pin compatibility with the STMicroelectronics NFC standalone solution. There is no internal direct connection between the two devices inside the package.
A complete range of memory sizes from 128 to more than 600 Kbytes (depending on profile) is available on the Secure Element.
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®packages, depending on their level of environmental compliance. ECOPACK®specifications, grade definitions and product status are available at: www.st.com. ECOPACK®is an ST trademark.

特性 Features

SIP (system-in-package) with ST21NFCB controller and ST33G1M2 32-bit secure microcontroller for UICC / SE applications
NFC controllerEnhanced 8/16-bit CPU core with 16 Mbytes linear addressable memory
180 Kbytes of EEPROM
6.4 Kbytes of RAM
36 Kbytes of EEPROM
High integrated analog front end (AFE) for RF transmission and reception including automatic card and field detection modes
Battery Off and Switched Off modes supported in Card Emulation mode
Optimized power consumption modes
Battery voltage monitoring
Support for up to 3 external Secure Elements
System clockFracN PLL input range from 12 to 52 MHz
27.12 MHz external crystal oscillator

Enhanced testability

PackageWFBGA 64-pin 4x4x0.8, MSL 1, ECOPACK®2

RF communicationsActive mode – Peer-to-PeerISO/IEC 18092 - NFCIP-1 Initiator & Target

Passive mode – Reader/WriterNFC Forum Type 1/2/3/4 tags
ISO/IEC 15693
MIFARE® Classic
KOVIO Barcode

Passive mode – Peer-to-PeerISO/IEC 18092 - NFCIP-1 Initiator & Target

Passive mode – Card EmulationISO/IEC 14443 Type A & B
JIS X 6319 – 4


Communication interfacesThree SWP interfaces up to 1.695 Mbit/s
I2C Slave interface up to 1 Mbit/s
SPI Slave interface up to 4 Mbit/s

Secure microcontrollerARM® SecurCore® SC300™ 32-bit RISC core
1280 Kbytes of Flash memory available
30 Kbytes of RAM
ISO/IEC 7816-3 interface for T=0 and T=1 protocols (master/slave mode)
Single wire protocol (SWP) Interface for communications with NFC router
SPI master/slave interface

Secure operating systemSupports state of the art Secure Element operating systems:JavaCard™ 3.0.4 Classical Edition
GlobalPlatform™ 2.2.1 with Amendments A,C,D and E
EMVCo™ certification


Electrical characteristicsSingle power supply pin (VBAT)
I/O dedicated voltage level (VPS_IO) from 1.8 V to 3 V
Battery voltage support from 0 V to 5 V
Supports Class B and C operating conditions for UICC
Ambient operating temperature -25 to + 85 °C

应用Mobile devices
Wearable devices
SmartWatch
Secure Connected Devices