ST3243C数据手册集成电路（IC）的驱动器接收器收发器规格书PDF

描述 Description

The ST3243B/ST3243C devices consist of 3 drivers, 5 receivers and a dual charge pump circuit. The devices meet the requirements of EIA/TIA and V.28/V.24 communication standards providing high data rate capability and enhanced electrostatic discharge (ESD) protection.

All transmitter outputs and receiver inputs are protected to ±8 kV using IEC61000-4-2 contact discharge and ±15 kV IEC61000-4-2 air discharge.

The receiver R2 is always active to implement a wake-up feature for the serial port.

The ST3243B/ST3243C devices have a proprietary low-dropout transmitter output stage enabling true RS-232 performance from a 3.0 V to 5.5 V supply with a dual charge pump. The devices are guaranteed to run at data rates of 250 kbps while maintaining RS-232 output levels.

The auto-power-down feature functions when FORCEON is low and FORCEOFFis high. During this mode of operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFFis set low, both drivers and receivers (expert R2B) are shut off, and supply current is reduced to 1 μA. Disconnecting the serial port or turning off the peripheral drives causes the auto-power-down condition to occur.

Auto-power-down can be disabled when FORCEON and FORCEOFFare high, and should be done when driving a serial mouse. With auto-power-down enabled, the device is activated automatically when a valid signal is applied to any receiver input.

Typical application are in notebook, subnotebook, palmtop computers, battery-powered equipment, hand-held equipment, peripherals, and printers.

特性 Features

• ESD protection for RS-232 I/O pins
•±8 kV IEC61000-4-2 contact discharge
•±15 kV IEC61000-4-2 air discharge
• 1 μA supply current achieved when in auto-power-down
• 250 kbps minimum guaranteed data rate
• Guaranteed 6 V/μs slew rate range
• Guaranteed mouse drive ability
• 0.1 μF external capacitors
• Meet EIA/TIA-232 specifications down to 3 V
• Available in SSOP-28 package

简介

ST3243C属于集成电路（IC）的驱动器接收器收发器。由制造生产的ST3243C驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。