SCSI TERMINATOR

DESCRIPTION The SCSI-2 and SCSI-3 standards recommend the use of active terminations at both ends of every cable segment in a SCSI system with a single-ended drivers and reveivers. The ST21S07A SCSI terminator, which is fully compliant with these standands, enables the designer to gain the benefi

文件：177.42 Kbytes 页数：10 Pages

STMICROELECTRONICS

意法半导体

Plug and Play SCSI Terminator

DESCRIPTION The DS2109 is intended for one chip Plug and Play (PnP) SCSI termination. Plug and Play SCSI requires the exit–point terminator on computer motherboards or host bus adapters to automatically switch off if an external device is connected to the system. The DS2109 satisfies this require

文件：85.59 Kbytes 页数：10 Pages

Dallas

SCSI Terminator

GENERAL DESCRIPTION Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in a SCSI system with single-ended drivers and receivers. The DS21S07A SCSI terminator, which is fully compliant with these standards, enables the designer to gain the benefits

文件：449.9 Kbytes 页数：8 Pages

Maxim

美信

SCSI Terminator

GENERAL DESCRIPTION Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in a SCSI system with single-ended drivers and receivers. The DS21S07A SCSI terminator, which is fully compliant with these standards, enables the designer to gain the benefits

文件：449.9 Kbytes 页数：8 Pages

Maxim

美信