ST1S03中文资料1.5 A, 1.5 MHz可调步降开关稳压器数据手册ST规格书

描述 Description

The ST1S03 is a step-down DC-DC converter optimized for powering a low voltage digital core in HDD applications and, generally, to replace the high current linear solution when the power dissipation may cause a high heating of the application environment. It provides up to 1.5 A over an input voltage range of 3 V to 16 V. A high switching frequency (1.5 MHz) allows the use of tiny surface-mount components: as well as the resistor divider to set the output voltage value, only an inductor, a Schottky diode and two capacitors are required. Besides, a low output ripple is guaranteed by the current mode PWM topology and by the use of low ESR SMD ceramic capacitors. The device is thermal protected and current limited to prevent damages due to an accidental short-circuit. The ST1S03 device is available in a DFN6D package.

特性 Features

• Step-down current mode PWM (1.5 MHz) DC-DC converter
• 2% DC output voltage tolerance
• Internal soft-start for STARTUP current limitation and power on delay of 50 - 100 μs
• Typical efficiency: > 70% over all operating conditions
• 1.5 A output current capability
• Not switching quiescent current: max 2.5 mA over temperature range
• Switch VDS: max. 350 mV at ISW= 750 mA
• Uses tiny capacitors and inductors
• Available in DFN6D 3 x 3 mm package with exposed pad

简介

ST1S03属于集成电路（IC）的稳压器-DC-DC开关稳压器。由制造生产的ST1S03稳压器 - DC-DC 开关稳压器DC-DC 开关稳压器 PMIC（电源管理集成电路）产品族中的产品是元器件级设备，用于需要稳定 DC 输入电压和/或将其转换为不同幅度的输出电压的应用。这些器件与称为“控制器”PMIC 的类似产品的区别在于集成了主开关元件，设备提供的电力会通过该元件。