ST16C1450IP28中文资料艾科嘉数据手册PDF规格书

GENERAL DESCRIPTION

The ST16C1450, ST16C1451 series (here on denoted as the 145X) is a universal asynchronous receiver and transmitter (UART). The 145X is foot print compatible to the SSI 73M1550 and SSI 73M2550 UART with one byte FIFO and higher operating speed and lower access time. The 145X provides enhanced UART functions with a modem control interface, independent programmable baud rate generators with clock rates to 1.5 Mbps. Onboard status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by external software to meet specific user requirements.

FEATURES

• Pin and functionally compatible to SSI 73M1550/2550

• 1 byte Transmit FIFO (THR)

• 1 byte Receive FIFO with error tags (RHR)

• Four levels of prioritized interrupts

• Modem Control Signals (CTS#, RTS#, DSR#, DTR#, RI#, CD#)

• Programmable character lengths (5, 6, 7, 8) with even, odd or no parity

• Crystal or external clock input (except 28 pin ST16C1451, external clock only)

• 1.5 Mbps Transmit/Receive operation (24 MHz) with programmable clock control

• Power Down Mode (50 uA at 3.3 V, 200 uA at 5 V)

• Software controllable reset output

• 2.97 to 5.5 Volt operation

APPLICATIONS

• Battery Operated Electronics

• Internet Appliances

• Handheld Terminal

• Personal Digital Assistants

• Cellular Phones DataPort